Speedmaster ls1 cast stroker crank.
11-06-2018 | 06:43 PM
#85
11-06-2018 | 10:27 PM
#87
Average balance cost in N. Ga. is about $250, that’s without Mallory, which is VERY expensive. I don’t think that number is very far off base, if Mallory is needed. Depends on crank bob weight and piston/rod weight choices.
11-07-2018 | 07:07 AM
#88
Speedmaster cast stroker crank for say $280 + $500 to balance it + $50 to put a reluctor wheel on it + $25 for a reluctor wheel = $835 for a usable cast stroker crank
Callies Compstar forged crank for $777 + $250 to balance = $1,027 for a usable forged stroker crank
~ $192 saving to go cast? For $200 or so more, I'd rather have the Compstar.
Callies Compstar forged crank for $777 + $250 to balance = $1,027 for a usable forged stroker crank
~ $192 saving to go cast? For $200 or so more, I'd rather have the Compstar.
11-07-2018 | 02:29 PM
#89
Speedmaster cast stroker crank for say $280 + $500 to balance it + $50 to put a reluctor wheel on it + $25 for a reluctor wheel = $835 for a usable cast stroker crank
Callies Compstar forged crank for $777 + $250 to balance = $1,027 for a usable forged stroker crank
~ $192 saving to go cast? For $200 or so more, I'd rather have the Compstar.
Callies Compstar forged crank for $777 + $250 to balance = $1,027 for a usable forged stroker crank
~ $192 saving to go cast? For $200 or so more, I'd rather have the Compstar.
11-07-2018 | 03:52 PM
#92
TECH Senior Member
Joined: Jun 2016
Posts: 21,537
Likes: 3,287
From: Central Cal.