Mavn

iTrader: (3)

Roll Race and Track Car (Fbody)
e85
t56
LW FW
Diamond stage 2 Clutch
3.90 rear gear
SBE LS1
PRC 2.5 243 Heads
58cc chamber
.040 Cometic Head Gasket
1.72 TSP Roller Rockers
I'm calculating 11.7:1 Comp with that head Setup if the motor was at .000 Deck.

Induction/Exhaust:
Fast 102/102 Combo
105mm Lid Speed Density
17/8 headers
TSP True Duals
25% UD Pulley

No cam yet. I haven't decided on the specs..

What are your Thoughts?

-MAvn

ddnspider

iTrader: (26)

It needs boost.

JK.....sort of... Anyways, I didn't see any type of ram air. I would consider something for a roll race car.

Tuskyz28

It's already a car on board with a setup pretty similar to that. No power numbers out the combo but it does run 10.0s @ 136 mph with a wicked squirley launch.

Mavn

iTrader: (3)

The CHRS 1313 Pro Stock seems like the right choice

ddnspider

iTrader: (26)

Agreed.

99 Black Bird T/A

iTrader: (4)

If you're building for E85 isn't 11.7 compression on the low side unless adding forced induction later? I read about folks running 11.7 to 12 to 1 on 93 octane pump gas. With E85 NA wouldn't ~14 in compression be acceptable?

Mavn

iTrader: (3)

at 11.7:1 you can run a hell of a lot more timing on E than on 93. for a "street" Car I wouldn't wanna do 14:1 that's asking for problems.

Che70velle

iTrader: (6)

soloman369

iTrader: (13)

Prob be a flop like the 416 and 4.8

Tuskyz28

What 416ci is a flop ?

Mavn

iTrader: (3)

My 572 rwhp 416 is a flop

Tuskyz28

I think the problem with 416ci motors is that most guys use stock LS3 heads on the motor and then for the cam it be POORLY speced. Let's be real here MOST cam guys can't/don't understand the cylinder head.

soloman369

iTrader: (13)

if these guys only knew

Tuskyz28

I have a couple buddies running 402-416ci motors and they all are 6 speed all motor cars. All run 10s as well. Some quicker than others. A 11 sec F body with a stroker gets no love here in my camp. Quickest car out the camp run 10.3s at 133 plus with a 402ci.

soloman369

iTrader: (13)

Well his goes 11.2 at 125 on e

SoFla01SSLookinstok

Hmmm. So no luv for a 11 sec stroker not knowing any details of combo? Usually a guy tells me he runs tens at over 130mph with a bolt on ls6. So the 402-416 cars are not proper?? Just messing with you.

Mavn... I think you know what to do.

Mavn

iTrader: (3)

Solomon can troll all he wants I don't care . lol

soloman369

iTrader: (13)

but am I stating facts or nah? Slip of our run is attached in case people want to fax check me

Mavn

iTrader: (3)

Post the 10 sec slip, from the same night .. lol

soloman369

iTrader: (13)

there wasn't any remember you were supposed to show it to me....