RJF

well got a new computer and got it all set up and this thing still wont move best time ran it 5 times tonight every run a 12.6 @ 107 mph the car should be going much faster shouldnt it with the 4400 stall off the line feeld great half track feel like it falls any info or tips or anyone with a 98 whats your shift points its shifting at 6400

Tranzor

Push the shift points up to around 6700 and see what that does... your MPH should be much faster with that cam. Are you sure the cam was installed correctly (dot to dot and all that)? What did it dyno, and what did the curve look like? Any unusual dips? Also, what was A/F like?

foff667

iTrader: (2)

yah definitly still sounds like theres something up...i was trapping 112 with my issues...i shouldve been able to trap 114 in the same weather if i wasnt bogging off the line. I'd definitly start looking elsewhere for your issues start with tune/cam install.

94form2000z

iTrader: (10)

WOW Vig 4400 that's a huge stall. Wander if that's where your losing your MPH. Definitely need higher shift points to take advantage of that cam.

foff667

iTrader: (2)

loosing mph is one thing but et's should be cut as long as hes got traction. mid 12's aint cuttin it.

RJF

im pulling 1.55 to 1.61 60 fts pulling the front tires everytime but 1/8 mile or so bam power is gone i spoke with matt at tsp and i think im just goona have to spend the money and let them tune it as close as they can with a mail order tune