MTI B1 cam?
Thread Starter
On The Tree
Joined: Feb 2003
Posts: 194
Likes: 0
From: Raceland, Louisiana
MTI B1 cam? Specs from site are
221/221 .558/.558 114 LSA
With all other internals stock. Can I just upgrade to Z06 springs? Will this work or should I upgrade other parts. I want to go as cheap as possible.
221/221 .558/.558 114 LSA
With all other internals stock. Can I just upgrade to Z06 springs? Will this work or should I upgrade other parts. I want to go as cheap as possible.
TECH Fanatic
Joined: Dec 2001
Posts: 1,060
Likes: 0
From: MI
Re: MTI B1 cam? Better go with new springs and push rods thats what I did with my B1. Isky 295D's and Titanium Manley retainers and hardened push rods. The springs might be a little over kill for a B1 but the valve train takes alot of abuse and I wanted to go with a spring that was really good not one that would barely get by.
Re: MTI B1 cam? I'm running a 222/222 .560 114 cam.
I went with REV 1116 dual springs. I like to do things right the first time, its also cheap insurance in case a spring were to break.
<small>[ April 04, 2003, 04:31 PM: Message edited by: I8COBRA ]</small>
I went with REV 1116 dual springs. I like to do things right the first time, its also cheap insurance in case a spring were to break.
<small>[ April 04, 2003, 04:31 PM: Message edited by: I8COBRA ]</small>
Joined: Nov 2001
Posts: 34,651
Likes: 2,577
From: Schiller Park, ILL Member: #317
Re: MTI B1 cam? </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by BayouVette:
<strong> Specs from site are
221/221 .558/.558 114 LSA
With all other internals stock. Can I just upgrade to Z06 springs? Will this work or should I upgrade other parts. I want to go as cheap as possible. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I've had Comp 26918s w/ 772 retainers and MTI hardened push rods with my B1 for 1.5 years now with no issues. 918s are plenty of spring for a mild B1. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ April 06, 2003, 12:01 PM: Message edited by: RPM WS6 ]</small>
<strong> Specs from site are
221/221 .558/.558 114 LSA
With all other internals stock. Can I just upgrade to Z06 springs? Will this work or should I upgrade other parts. I want to go as cheap as possible. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I've had Comp 26918s w/ 772 retainers and MTI hardened push rods with my B1 for 1.5 years now with no issues. 918s are plenty of spring for a mild B1. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ April 06, 2003, 12:01 PM: Message edited by: RPM WS6 ]</small>
Re: MTI B1 cam? I ran(run) ISKY's as well, better safe than sorry, of course I have had another cam installed since and going to an even bigger one next week. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
