got the car down to the cam HELP!!!!
Thread Starter
Teching In
Joined: Feb 2004
Posts: 41
Likes: 0
got the car down to the cam HELP!!!! ok ive gotten down to the cam....so im tryin the jpr tool method but with the 5/16 wooden dowels ok...... so i stick them in and i put a push rod in the push rod whole and spud the cam but the push rods still movin up and down way is this i thought it shouldnt move now since them sticks are in there help me please!!!!!
TECH Enthusiast
Joined: Mar 2004
Posts: 508
Likes: 0
From: Bloomfield, NM
are the rods far enough in? they should go in about 18". make sure to spin the cam while you slide the rods in, itll make sure they can slide under the lifters. it may take some effort. good luck
