5.7 heads mil .025 224/244 p/v?
04-09-2003, 12:17 AM
#4
Re: 5.7 heads mil .025 224/244 p/v? probubly.....is it the TR 224?
I am running that on my 0.020" milled heads with 2.08"/1.60" valves. I tried a 234/230 but it was too tight. The TR 224 gave me over 0.120" on the exhaust valves. You should have no problem (with the stock valves). You may even be able to go with the TR 230/224 (call TR).
Chris
I am running that on my 0.020" milled heads with 2.08"/1.60" valves. I tried a 234/230 but it was too tight. The TR 224 gave me over 0.120" on the exhaust valves. You should have no problem (with the stock valves). You may even be able to go with the TR 230/224 (call TR).
Chris
04-09-2003, 09:54 PM
#6
Re: 5.7 heads mil .025 224/244 p/v? It will be a little close but shouldn't hit unless you do a big backshift.
I have LS6 Heads milled .030 with 2.02/1.60 valves,TR224 Cam and had to cut reliefs for my intake valves.There was something like .050 clearence but wanted a little more insurance.
I have LS6 Heads milled .030 with 2.02/1.60 valves,TR224 Cam and had to cut reliefs for my intake valves.There was something like .050 clearence but wanted a little more insurance.