New MTI G1 cam?
#1
Teching In
Thread Starter
Join Date: Mar 2004
Location: SC
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
New MTI G1 cam?
MTI has a new cam out with Int Dur=228, Exh Dur=232, Int lift=588, Exh lift=575, and LSA=113. Does anyone have this cam yet? If so what kind of numbers are being produced on the dyno or track? How do ya'll think this one might run???
Thanks....
Thanks....
#2
TECH Senior Member
Join Date: Apr 2004
Location: Texas
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Searching Is Fun !!!
Heres a few links that I found from searching. All I typed in was MTI G1. Its not hard and its fun too
https://ls1tech.com/forums/showthrea...ghlight=MTI+G1
https://ls1tech.com/forums/showthrea...ghlight=MTI+G1
https://ls1tech.com/forums/showthrea...ghlight=MTI+G1
heres a link for the search function for next time -->https://ls1tech.com/forums/search.php
https://ls1tech.com/forums/showthrea...ghlight=MTI+G1
https://ls1tech.com/forums/showthrea...ghlight=MTI+G1
https://ls1tech.com/forums/showthrea...ghlight=MTI+G1
heres a link for the search function for next time -->https://ls1tech.com/forums/search.php
#5
MTI installed our G1 a little over two months ago. It's not a huge Cam and we've been very pleased with our results. We dynoed 370's through cats and LS1 intake. 380's after the LS6 intake. 390's after the cutouts.(RWHP unlocked)
#6
TECH Fanatic
iTrader: (1)
Join Date: Nov 2003
Location: Jackson MI
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MidnightWS6
MTI installed our G1 a little over two months ago. It's not a huge Cam and we've been very pleased with our results. We dynoed 370's through cats and LS1 intake. 380's after the LS6 intake. 390's after the cutouts.(RWHP unlocked)
#7
On The Tree
iTrader: (1)
Join Date: Jul 2004
Location: Houston
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1BadMoFo
are those numbers on stock heads? If so, dayum I can't wait to get mine in!
I'm sure they are stock heads, I witnessed a 04 GTO pull 392rwhp with the G1 and bolt on's and stock heads.
Trending Topics
#12
12 Second Club
iTrader: (2)
Join Date: Jan 2004
Location: Palos Hills, IL
Posts: 3,321
Likes: 0
Received 0 Likes
on
0 Posts
if i am not mistaken...some one at MTI chime in...the G1 cam is the exact same cam that is used in the new 455 stroker setup they have going!!!...there is an awesome soundclip of the idle on there site for the G1 cam...(btw is that with the stroker or all stock internals except for the cam?) I've heard somewhat what it sounds like through trueduals....i wanna see how ittll sound through LT's cats or no cats and GMMG
#15
TECH Addict
iTrader: (3)
Join Date: Nov 2001
Location: HOU - yeah, you know the rest.
Posts: 2,959
Likes: 0
Received 1 Like
on
1 Post
The G1 cam is the cam, they put in the 455 stroker '04 GTO, it made 535 rwhp through cats and full exhaust. Another interesting tid bit, it made 400 rwhp and 400 lb-ft of torque at 2,000 rpm!
#16
blazeone is correct, the '04 GTO has a cast number #241 on the heads were a LS6 has a cast #243. I looked at doing a LS6 conversion but this G1 sounds sweet...I wonder how it idles.