Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Vid and sound clip of my TSP MS3 with True duals. ENJOY!!

Thread Tools
 
Search this Thread
 
Old 02-26-2005, 02:31 PM
  #141  
Banned
 
SS346Ls1's Avatar
 
Join Date: Nov 2004
Location: Palmetto, GA
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mike's02ls1
It's fine around town, but the cam really opens up past 3,500rpms. This cam and some AFR 205cc heads will be a killer setup. Atleast 450+rwhp. Let the MS3 take u under the wing.

How come it underperforms vs a cam much smaller .. such as my cam. Almost 10 degrees bigger on the duration size vs mine...


My set up is missing ls6 intake and pulley also?


Last edited by SS346Ls1; 02-26-2005 at 03:35 PM.
Old 02-26-2005, 03:23 PM
  #142  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by SS346Ls1
How come it barely underperforms vs a cam much smaller then it... such as my cam. Almost 10 degrees on the duration size....

Yet my set up is missing ls6 intake and pulley also?

WTF, english is your best friend! Go talk **** in the southern section!
Old 02-26-2005, 03:46 PM
  #143  
TECH Regular
iTrader: (1)
 
zo6vetteman2003's Avatar
 
Join Date: Jan 2005
Location: Middleboro Ma.
Posts: 495
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mike's02ls1
Great sound, set any car alarms go off?? lol!
Old 02-26-2005, 03:49 PM
  #144  
Launching!
iTrader: (3)
 
LordOfChaos's Avatar
 
Join Date: Apr 2004
Location: Hurlburt Field, FL
Posts: 219
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by SS346Ls1
How come it underperforms vs a cam much smaller .. such as my cam. Almost 10 degrees bigger on the duration size vs mine...


My set up is missing ls6 intake and pulley also?

take a look at the 60fts dude.. hes doin it on a 10bolt with gears.. vs u doin it with a built trans/rear end with the same gears and you had et streets...

.1 in the 60ft is good for about .2 in the 1/4... theres more than the diff. right there.

Take a look at the trap speed to show his car has more potential in it.
Old 02-26-2005, 03:52 PM
  #145  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by zo6vetteman2003
Great sound, set any car alarms go off?? lol!
Yeah just a few. Thanks for the comments..
Old 02-26-2005, 03:54 PM
  #146  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by Evil98RT
take a look at the 60fts dude.. hes doin it on a 10bolt with gears.. vs u doin it with a built trans/rear end with the same gears and you had et streets...

.1 in the 60ft is good for about .2 in the 1/4... theres more than the diff. right there.

Take a look at the trap speed to show his car has more potential in it.
Amen.. Ignore the Southern Dumb ***. What he knows is what he reads on the Bathroom walls!!!

Car looks good Evil98RT!
Old 02-26-2005, 03:55 PM
  #147  
Banned
 
SS346Ls1's Avatar
 
Join Date: Nov 2004
Location: Palmetto, GA
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Evil98RT
take a look at the 60fts dude.. hes doin it on a 10bolt with gears.. vs u doin it with a built trans/rear end with the same gears and you had et streets...

.1 in the 60ft is good for about .2 in the 1/4... theres more than the diff. right there.

Take a look at the trap speed to show his car has more potential in it.
I trap 1mph slower... without ls6 intake.. without a dyno tune.. without a pulley.

Futral FM14 > MS3
Old 02-26-2005, 03:57 PM
  #148  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by SS346Ls1
I trap 1mph slower... without ls6 intake.. without a dyno tune.. without a pulley.

Futral FM14 > MS3
U still don't know **** about CARS!! I'm going to wax U in the 1/4 mile!!N/A to boot bitch!!!
Old 02-26-2005, 04:12 PM
  #149  
Banned
 
SS346Ls1's Avatar
 
Join Date: Nov 2004
Location: Palmetto, GA
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mike's02ls1
U still don't know **** about CARS!! I'm going to wax U in the 1/4 mile!!N/A to boot bitch!!!
I don't know **** about cars?

Ok?

I am "going" to wax you. Doesn't count. Right now my best time is better then your best time. You've got catching up to do.
Old 02-26-2005, 04:17 PM
  #150  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by SS346Ls1
I don't know **** about cars?

Ok?

I am "going" to wax you. Doesn't count. Right now my best time is better then your best time. You've got catching up to do.
U shown no one u know anything about cars. Your best time isn't even yours u TOOL BAG!! Don't be scared now and make excuses!!! The more u type on the internet the more people think your a DUMB ***!!!
Old 02-26-2005, 04:20 PM
  #151  
Banned
 
SS346Ls1's Avatar
 
Join Date: Nov 2004
Location: Palmetto, GA
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mike's02ls1
U shown no one u know anything about cars. Your best time isn't even yours u TOOL BAG!! Don't be scared now and make excuses!!! The more u type on the internet the more people think your a DUMB ***!!!

You are just pulling things out of your ***. I know nothing about cars?
Old 02-26-2005, 04:25 PM
  #152  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by SS346Ls1
You are just pulling things out of your ***. I know nothing about cars?
OK PROVE IT!!! GO TROLL SOMEWHERE ELSE, I hear mommy calling for you!!!
Old 02-26-2005, 04:29 PM
  #153  
Banned
 
SS346Ls1's Avatar
 
Join Date: Nov 2004
Location: Palmetto, GA
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mike's02ls1
OK PROVE IT!!! GO TROLL SOMEWHERE ELSE, I hear mommy calling for you!!!

Do. Not. Be. Jealous.
Old 02-26-2005, 04:36 PM
  #154  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by SS346Ls1
Do. Not. Be. Jealous.
STFU i'm not jealous. I know I have the faster car, your just too DUMB to relize it.
Old 02-26-2005, 04:57 PM
  #155  
Banned
 
SS346Ls1's Avatar
 
Join Date: Nov 2004
Location: Palmetto, GA
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by mike's02ls1
STFU i'm not jealous. I know I have the faster car, your just too DUMB to relize it.

You also have LS6 intake, dyno tune.. and pulley. Bigger cam....
Old 02-26-2005, 05:16 PM
  #156  
TECH Fanatic
Thread Starter
iTrader: (2)
 
mikes02ls1's Avatar
 
Join Date: Nov 2003
Location: Casa Grande,AZ
Posts: 1,518
Received 5 Likes on 5 Posts

Default

Originally Posted by SS346Ls1
You also have LS6 intake, dyno tune.. and pulley. Bigger cam....
My heart bleeds. U also have suspension, and rear end dumb ***!!! I'm all stock.




All times are GMT -5. The time now is 03:17 PM.