Damn. I can't believe I'm askin you guys If I have to worry about a NEON? GRRR
#1
TECH Apprentice
Thread Starter
Join Date: Apr 2003
Location: Raleigh, NC
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Damn. I can't believe I'm askin you guys If I have to worry about a NEON? GRRR
There is a NEON SRT4 Pushing well over 400 HP that's current best time before his most recent mods was 11.6 at 124 and with current mods should take him to 10.99
This neon keeps beating on Z06 H/C cars all the time. I've seen the clips.
I did say I wouldn't run on the street because I know my 10 bolt will snap on first launch at the track.
Do I have anything to worry about with a Neon that is now supposedly going to run an 10.99.
I just ordered
1. HP tuners Software,
2. New Stock Replacement MAF (old one throwin low voltage codes)
3. In Two weeks I pick up a set of the Original Stainless Steel SLP LT's
For Now though are these 3 things enough to beat him? I drive and shift very well.
Even with the 383 shortblock East Side built for me. Eagle Crank, Eagle H-Beam Rods (6.2") and JE Flat Top Pistons my compression is still stock so I should be good as NA for now right?
1. until I switch to 225cc AFR Mongoose heads with 76cc chambers. I"m kinda holdin off on those heads because I want to pick the best valvetrain: lifter, rocker, valve, spring, etc etc. Most reliable and durable even at high RPM)
2. I also haven't set my mind on a Turbo CAM yet. Ligenfilter Turbo Has this GT 2-3 Cam or what ever I want to look into.
I do have it narrowed down to 2 Turbo kits I want. Either Pham Speed or the one HP Performance is working on..
Pham has a complete kit for sale but doesn't come with a Front mount yet.
So I would have to wait till they have a complete kit including front mount.
Also The HP performance kits are going to be awesome but once again I have o wait.
Either way I gotta find some Power and make sure I'm deep into the 11's or high 10's. Especially since we'll be on the highway or street..
Right now I'm putting down 400/440.
I would think with LT's I would gain another 40 eh?
Hell even an LSX intake manifold and 90 mm Throttlebody is like over $1000 isn't it. For that price I might as well get heads. LOL See I know I want to end up with this intake manifold and TB when I'm done so I really don't see a point in buying a used LS6 intake manifold right away and then selling it later.
Any Advice guys. I'm all eyes and ears!
#3
TECH Apprentice
Thread Starter
Join Date: Apr 2003
Location: Raleigh, NC
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PREDATOR-Z
What are your times right now?/
Just throw a 150 shot N2O on top (after tuning), and a set of slics, get him good at the line and tell him to kiss your _ss.
Just throw a 150 shot N2O on top (after tuning), and a set of slics, get him good at the line and tell him to kiss your _ss.
I really don't have any times since this new build.
All I been doin since I got the car back has been fixin broken ****. Just replaced my stage 3 clutch, master cyl, slave cyl, transmission mount, fuel pump/system
Uninstalled a shorted line lock and a bunch of broken wires.
Now that I got things straightened out for the most part I'm tryin into look into makin more solid power.
#4
Launching!
Join Date: Oct 2003
Location: Cary, NC/University Heights, OH
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Yes, you have to worry about this Neon. I know which Neon you are talking about. It's fast, and if I remember, he's had even more work done to it since those video clips you are talking about. Though it's a Neon and you are obviously biased, fast is still fast. So get to worrying, put up or shut up, and quit causing a raucous over at HPJ.
#6
Nothing to worry about, it's just a Neon.
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
#7
Launching!
iTrader: (14)
Join Date: Aug 2004
Location: Lewisville, TX
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
All I can say is.... you do something to worry about. Like what was said in a previous post, "there is always someone faster than you". Whether it be a an f-body or a neon! HP doesn't really matter.
Trending Topics
#8
TECH Apprentice
Thread Starter
Join Date: Apr 2003
Location: Raleigh, NC
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 04BlackSRT-4
Nothing to worry about, it's just a Neon.
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
I know you said track and I said street. We both have opposing tastes on where we race . IF I ever runat the track it will be just once or twice to get a generalized time of how quick my ca is. To much **** breaks at the track. We've gone over this. I'm not trying to have this spill over fro HPJ eiher.
It was straight up technicial inquirey from the guys that know their stuff and know it well. LS1.com may be for fun but this is definatly the place I come for technical info.
I'm not about to get i the middle of a flame war or participate in any drama over here. Saveit for HPJ.
Scooby I'm very much so looking to racing you. I'm sure it's gonna be a rush for the both of us. I think it will be much closer and more interesting of a race on the street but we'll see.
#9
TECH Enthusiast
Join Date: Jun 2003
Location: So Cal
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 04BlackSRT-4
Nothing to worry about, it's just a Neon.
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
#10
TECH Enthusiast
iTrader: (3)
Originally Posted by D3IMOS
Either way I gotta find some Power and make sure I'm deep into the 11's or high 10's. Especially since we'll be on the highway or street..
Right now I'm putting down 400/440.
I would think with LT's I would gain another 40 eh?
Any Advice guys. I'm all eyes and ears!
But... if you really want to win (and I think it should be a driver's race now) why not add some N2O to make sure?
Finally, if you are going to race on the street, make sure it's at least a 1/4 mi. stretch, and be careful. Good Luck.
#11
Originally Posted by Revelation222
Not to hyjack or anything but I would love to hear some of your mods that got you a 11.6 @124. Those are great times (for a skittle ) My buddy just got a silver one, and I would like an idea of what he has to do to hit those times. Thanks. Nice ride, bro.
Have your buddy pm me on srtforums if he needs any help too. My screen name on there is silverscooby. I used to have a silver WRX, hence the name.
#15
400rwhp, 440rwtq is pretty damn good ... just get the LT's, ls6 intake, underdrive pulley, tune, GUT THE PIG and you're set ... if you can't run 10's with over 450rwhp (30hp for the LT's, 20hp for the intake, pulley and tune) after those mods in a tin can you got problems
that neon should hardly be a problem for your car ... ever try the driver mod?
that neon should hardly be a problem for your car ... ever try the driver mod?
#18
Originally Posted by 04BlackSRT-4
Nothing to worry about, it's just a Neon.
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
oh great, here we go, im staying out of this one.
#19
TECH Addict
iTrader: (2)
Originally Posted by 04BlackSRT-4
Nothing to worry about, it's just a Neon.
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
And in case you didnt get it from our pm's and posts on the board, I want to do this at the track. What part of "at the track" includes racing on the street?
Oh yeah, 10.99's?
impressive time.Good Luck on the 10s.wish the srt around here run those times.wouldnt mind lining up with them just for fun.
my advice for the other guy.slap that n2o and spray away.like said the key is tuning.good luck.
#20
TECH Apprentice
Join Date: Aug 2004
Location: ohio, north carolina
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Christopher,
Good luck against Scoob.
I'm not gonna start over here, but how do you even know you have 400/440? You weigh 500+ lbs or more than scoob and you have less hp and torque..... do the math.
Good luck against Scoob.
I'm not gonna start over here, but how do you even know you have 400/440? You weigh 500+ lbs or more than scoob and you have less hp and torque..... do the math.