Which heads to go with FM13 Cam to get close to 450rwhp?
#26
Originally Posted by KB99WS6
Trying to pick a H/C combo that can get me close to 450rwhp and still maintain good streetability. Thats why I started with the F13 but not sure which heads would be best. Oh and by the way, its on a budget...
Many (ok, most) of these 440rwhp cars have bolt-ons like the FAST intake, 90mm TB, 85mm MAF, true 3in duals, electric water pump, or cutouts, etc. You can easily spend an extra grand or two just to squeak that extra 10-20rwhp out of an engine.
So with that said, you could go ahead and spend that extra cash in a set of AFRs and have a real nice H/C setup to build on for the future. Just an idea to think about..
#27
TECH Resident
Thread Starter
iTrader: (6)
Join Date: Oct 2004
Location: Long island, NY
Posts: 947
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FroDaddy
Remember, that even with the right heads it will depend largely on what bolt-ons you get. Your car has to breath to make the power.
Many (ok, most) of these 440rwhp cars have bolt-ons like the FAST intake, 90mm TB, 85mm MAF, true 3in duals, electric water pump, or cutouts, etc. You can easily spend an extra grand or two just to squeak that extra 10-20rwhp out of an engine.
So with that said, you could go ahead and spend that extra cash in a set of AFRs and have a real nice H/C setup to build on for the future. Just an idea to think about..
Many (ok, most) of these 440rwhp cars have bolt-ons like the FAST intake, 90mm TB, 85mm MAF, true 3in duals, electric water pump, or cutouts, etc. You can easily spend an extra grand or two just to squeak that extra 10-20rwhp out of an engine.
So with that said, you could go ahead and spend that extra cash in a set of AFRs and have a real nice H/C setup to build on for the future. Just an idea to think about..
#30
10 Second Club
iTrader: (12)
Originally Posted by KB99WS6
But other than the ability to do additional porting, what does the TEA heads over the PP stage 2 LS6 heads.
Originally Posted by KB99WS6
So I am just curious what are all the benefits of a TEA head over the patriots and is it really worth the difference in price??
My TEA 5.3L 1.5's w/a little itty bitty F11 made 436/416 through a full exhaust, 12 bolt/4.56's, and going mid 11's @ 122.
The TEA headed guys like their heads, and don't mind paying that little extra for quality, power, reliability, and (one more time) customer service/satisfaction.
But hey, don't listen to me... I'm just a TEA nut swinger.....
#31
imjust trying to get my f13 in right now, but later on i when i forge up the bottom end i want to run afr 205's out of the box with the f13.. i thnk i ccould get 425 in my auto that way, and add a f.a.s.t. intake setup as well.