So Im walking around autozone.....
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: Corpus Christi, Texas
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
So Im walking around autozone.....
And just happen to pass by the oil. I figure what the hell might as well look at the castrol oil. Well I pull out a couple quarts of castrol syntec 0w30 and look on the back. Sure enough it says made in germany. So I grab seven of them and they all say made in germany. I go to pay for them and they charge me less than $30 for 7 quarts. I live in south Texas and it gets pretty hot down here. Is it ok to use this oil? And what is the best oil filter to buy? thanks
#2
Trending Topics
#8
TECH Senior Member
iTrader: (4)
Yeah, dont worry about the 0w rating. Thats simply because it has a low temperature pour point. Its going to be thicker than M1 5w30 at the rest of the normal temperatures it sees. Also, autozone was running a special this week here, $4.00 a quart for castrol... Maybe thats what you found? I think its normally $5+.
#18
Originally Posted by Richiec77
K&N oil filter. My oil pressure is up compared to the fram junk.
imagine a car with like 2-3psi of oil pressure. Maybe an old 70's ford pickupv8 with bazillion miles. The car has no oil pressure because the bearings and tolerances are so wide there is no backpressure to the oil pump.. its hard to keep those wide open spaces filled with oil!
#19
add..... Im very happy to see people making educated decisions about oil filters!
Although, the K&N does NOT flow more, if you have read the new tests at www.bobistheoilguy.com
Purolator premium plus is my favorite trade off for flow/filtering, it does both very well!
Although, the K&N does NOT flow more, if you have read the new tests at www.bobistheoilguy.com
Purolator premium plus is my favorite trade off for flow/filtering, it does both very well!