Porting stock ls1 heads?
#22
Originally Posted by stone4779
SO what books do you recommend?
and what tools?
and what tools?
Dave
#23
TECH Addict
iTrader: (59)
Join Date: Oct 2004
Location: Vance, Alabama
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
The bump is for water jacket clearance through that area just behind the valve guide boss. Be real careful in that area, just blend it into the roof of the port, do not remove any material than needed.
#25
TECH Addict
iTrader: (59)
Join Date: Oct 2004
Location: Vance, Alabama
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
This is a link to what its gonna look like www.dbtech.net/barb/portsculptor/ it will be up at the end of the week...hopefully with a dyno graph of a stock 98 M6 Formula that picked up over 7 hp/tq on a TB. This is just the main page with my TBs on it and will have cylinder head pages behind it.
#27
TECH Addict
iTrader: (59)
Join Date: Oct 2004
Location: Vance, Alabama
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bo White
I have flowed two sets of mine and the usually go around 272/205 @ .600, flowing another one here in the next week or so. They are production valved heads that cc out aound 215/80.