Why hasn't...
Thread Starter
SSU'S Vice Mod
Joined: Jul 2004
Posts: 2,391
Likes: 0
From: Hazard Co. Maryland
Why hasn't... ... any other manufacture jumped on the Gen III bandwagon with offering cylinder heads? AFR and GMPP are the only two manufactures (and one gets the GM tooling) that are making aftermarket heads. Is anyone else (Brodix, Dart, ProTopline...) researching or developing heads? Not that the two product lines that are currently on the market aren't bad (by no means are they) but it would be nice to see some more competition to help cut the costs. Anybody have any ideas?
Originally Posted by sb427f-car
... any other manufacture jumped on the Gen III bandwagon with offering cylinder heads? AFR and GMPP are the only two manufactures (and one gets the GM tooling) that are making aftermarket heads. Is anyone else (Brodix, Dart, ProTopline...) researching or developing heads? Not that the two product lines that are currently on the market aren't bad (by no means are they) but it would be nice to see some more competition to help cut the costs. Anybody have any ideas?
I have a set of All Pro's... there their own deal Comp Cams bought pro top line and I'd be looking for some LS1/6 heads from them also... I'd agree that the stock heads provide enough capabilities for 90% of builds.. brodix and dart are prob busy trying to out do each other in the big block stuff..
Thread Starter
SSU'S Vice Mod
Joined: Jul 2004
Posts: 2,391
Likes: 0
From: Hazard Co. Maryland
Originally Posted by CTSmechanic
I have a set of All Pro's... there their own deal Comp Cams bought pro top line and I'd be looking for some LS1/6 heads from them also... I'd agree that the stock heads provide enough capabilities for 90% of builds.. brodix and dart are prob busy trying to out do each other in the big block stuff..
Trending Topics
AFR, ET Performance, All Pro, Dart, and Edelbrock all have heads that are released or going to be released. I asked a guy I know at Brodix and it's gonna be a lil while on them.
Personally I'd take an All Pro and have someone who knows how to port them go at it and have the best possible head as of right now.
Personally I'd take an All Pro and have someone who knows how to port them go at it and have the best possible head as of right now.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I ruin the end of films...
iTrader: (2)
Joined: Nov 2002
Posts: 1,545
Likes: 0
From: Taking back some video tapes
Callies will be the primary distributor for them. Brodix has nothing coming for LS1 or LT1 applications, although you will be able to get some nice setups from Weldtech later this year.
I love the PRI show.
I love the PRI show.