Intake Manifold Flow Test
#21
TECH Veteran
iTrader: (21)
Originally Posted by 69firebird
this is good info, so basically the edelbrock is the best flowing, its just getting those to fit under a stock hood is kinda challenging
#22
TECH Apprentice
iTrader: (7)
Join Date: Jun 2004
Location: Brooklyn
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
It would be great if someone besides TPiS figured out how to get a larger (90mm) TB on the LS6 intake. They could make a killing mating 90mm TB necks to LS6 intakes for $200/each.
Ben
Ben
#25
LS1TECH Sponsor
iTrader: (1)
manifolds
Both the Fast and Weiand were cleaned up internally and port matched but not to the head I tested. Port matching really doesn't help that much unless they are way off.
Steve
Steve
Originally Posted by HumpinSS
Was that a stock or ported fast intake?
__________________
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
#26
TECH Fanatic
iTrader: (1)
Join Date: Feb 2004
Location: Sunrise Fl
Posts: 1,369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jrp
Steves words verbatim
i've said it once, and i'll say it again, steve is the man
i can post up each individual flow sheet if anybody wants them.
#28
TECH Fanatic
iTrader: (14)
Join Date: Dec 2003
Location: Salisbury,MD
Posts: 1,729
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/showpost....9&postcount=48
There is a test of a Wenzler single plane manifild on there (actually test of the intake port of the head flowed through the intake). You'll notice the single plane maintains better flow higher everywhere in the lift range.
There is a test of a Wenzler single plane manifild on there (actually test of the intake port of the head flowed through the intake). You'll notice the single plane maintains better flow higher everywhere in the lift range.