TR224 .561 112LSA dyno/track results>
#1
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Oct 2004
Location: Edmond, OK
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
TR224 .561 112LSA dyno/track results>
Post em. Through a 9in or 12 bolt perferably with M6.
My dyno #s w/ 10bolt 363 rwhp/358ftlbs. 105 degree air intake temp.
Since then added LS6 intake, ported stock tb. 9 inch w/ 4.56s.
Track times as of 09-17-04. @ 3550lbs
12.48 @ 111 with 1.68 60 ft on 28 x 10.5 x 15 et drags.
POST SIMILAR SETUP TIMES AND DYNOS>>>>>>
My dyno #s w/ 10bolt 363 rwhp/358ftlbs. 105 degree air intake temp.
Since then added LS6 intake, ported stock tb. 9 inch w/ 4.56s.
Track times as of 09-17-04. @ 3550lbs
12.48 @ 111 with 1.68 60 ft on 28 x 10.5 x 15 et drags.
POST SIMILAR SETUP TIMES AND DYNOS>>>>>>
#2
SN95 Director
iTrader: (16)
man, you really love that dont you.
https://ls1tech.com/forums/search.php?searchid=1480150
https://ls1tech.com/forums/search.php?searchid=1480154
https://ls1tech.com/forums/search.php?searchid=1480150
https://ls1tech.com/forums/search.php?searchid=1480154
#3
12 Second Club
iTrader: (28)
Join Date: Jul 2003
Location: Toledo, Oh
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Stock clutch, stock rearend and gears, ls1 intake, and mods below 12.70 @ 110.7mph w/ 1.92 sixty. This was at milan dragway on opening day w/ 20-30mph headwinds..
also no ported TB here
also no ported TB here