0.030 milled heads, 7.35 or 7.4 pushrods???
04-21-2005, 11:43 PM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
0.030 milled heads, 7.35 or 7.4 pushrods??? I have GTP stg. II heads 2.02 1.57 that are milled 0.030 with the F13 cam which push rods should I run. One company told me to run 7.35 and the other company told me to run 7.4 any input would be appreciated
04-22-2005, 09:08 AM
#4
12 Second Club
iTrader: (55)
Join Date: Jul 2002
Location: Raymore, MO
Posts: 1,785
Likes: 0
Received 0 Likes
on
0 Posts
I was told, and now use 7.4 with a .025 rocker pedastel shim. My 7.375 had the cup on the rocker arm coming off the pushrod. You might visually check that first.
