Biggest Baddest Best cam only cam..........
#22
11 Second Club
iTrader: (6)
Join Date: Feb 2003
Location: Illinois
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Louis
I wouldnt say that, 01-Z and Magnus have the exact opposite engine packages when it comes to the bottom end.
Magnus is on a 99 or 98 long block with the 85x castings, and 01-z is on the 01 longblock with the 241 castings.
Both make 413 rwhp, both run 10.29s @ exactly 128.48 mph.
Magnus is on a 99 or 98 long block with the 85x castings, and 01-z is on the 01 longblock with the 241 castings.
Both make 413 rwhp, both run 10.29s @ exactly 128.48 mph.
#23
12 Second Club
iTrader: (4)
Join Date: Jan 2004
Location: NJ
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LSmokin1
My 2000 SS has the 241 casting on the heads. Why is that?
Just our motors where built later close to the 01 model year when the 241's alread replaced the others.
#24
11 Second Club
iTrader: (6)
Join Date: Feb 2003
Location: Illinois
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PG45
Mine too....its because they are red!
Just our motors where built later close to the 01 model year when the 241's alread replaced the others.
Just our motors where built later close to the 01 model year when the 241's alread replaced the others.
Yah its gotta be the red
Yah your right, totaly forgot about that. Spose i should have glanced at my build number
#25
10 Second Club
iTrader: (45)
Join Date: Dec 2004
Location: Seabrook, TX
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
From what I've seen the majority of F15 cams have not made any big numbers like the X4, or T-REX. Also let me clarify the above statement, I could give a rats *** who dynos the most, if it dynos 200 r.w.h.p., and runs a 10.00 then performance is what counts.
#26
11 Second Club
Join Date: May 2002
Location: Peoria, AZ
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by INVISIBLEZ
From what I've seen the majority of F15 cams have not made any big numbers like the X4, or T-REX. Also let me clarify the above statement, I could give a rats *** who dynos the most, if it dynos 200 r.w.h.p., and runs a 10.00 then performance is what counts.
#27
11 Second Club
Join Date: May 2002
Location: Peoria, AZ
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by INVISIBLEZ
From what I've seen the majority of F15 cams have not made any big numbers like the X4, or T-REX. Also let me clarify the above statement, I could give a rats *** who dynos the most, if it dynos 200 r.w.h.p., and runs a 10.00 then performance is what counts.
#30
10 Second Club
iTrader: (9)
Join Date: Jan 2004
Location: Daytona Beach, FL
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JZ'sTA
If flycuting isn't a problem you can have a custom cam made for you with 260+ duration and 650+ lift.
It will idel like a bitch but will make those other cams seem small.
It will idel like a bitch but will make those other cams seem small.
#31
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Mar 2005
Location: Rancho Cucamonga, Ca
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JZ'sTA
If flycuting isn't a problem you can have a custom cam made for you with 260+ duration and 650+ lift.
It will idel like a bitch but will make those other cams seem small.
It will idel like a bitch but will make those other cams seem small.
#33
10 Second Club
iTrader: (45)
Join Date: Dec 2004
Location: Seabrook, TX
Posts: 1,516
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by camaro98z28
How well is your F11 running?
#36
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Mar 2005
Location: Rancho Cucamonga, Ca
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
This is from the TR's website,
"Rodney's car has been raced to a best of 10.433 @ 130.19 mph with a 1.401 sixty foot time. All of this was accomplished on the stock rods, pistons, crankshaft, and cylinder heads. He is the current "camshaft only" ET record holder for LS1 vehicles in the country."
"Rodney's car has been raced to a best of 10.433 @ 130.19 mph with a 1.401 sixty foot time. All of this was accomplished on the stock rods, pistons, crankshaft, and cylinder heads. He is the current "camshaft only" ET record holder for LS1 vehicles in the country."
#37
10 Second Club
iTrader: (9)
Join Date: Jan 2004
Location: Daytona Beach, FL
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sandking
This is from the TR's website,
"Rodney's car has been raced to a best of 10.433 @ 130.19 mph with a 1.401 sixty foot time. All of this was accomplished on the stock rods, pistons, crankshaft, and cylinder heads. He is the current "camshaft only" ET record holder for LS1 vehicles in the country."
"Rodney's car has been raced to a best of 10.433 @ 130.19 mph with a 1.401 sixty foot time. All of this was accomplished on the stock rods, pistons, crankshaft, and cylinder heads. He is the current "camshaft only" ET record holder for LS1 vehicles in the country."
#38
TECH Veteran
iTrader: (10)
Originally Posted by sandking
This is from the TR's website,
"Rodney's car has been raced to a best of 10.433 @ 130.19 mph with a 1.401 sixty foot time. All of this was accomplished on the stock rods, pistons, crankshaft, and cylinder heads. He is the current "camshaft only" ET record holder for LS1 vehicles in the country."
"Rodney's car has been raced to a best of 10.433 @ 130.19 mph with a 1.401 sixty foot time. All of this was accomplished on the stock rods, pistons, crankshaft, and cylinder heads. He is the current "camshaft only" ET record holder for LS1 vehicles in the country."
until then they can just sub out ET for MPH
#39
TECH Apprentice
Thread Starter
iTrader: (7)
Join Date: Mar 2005
Location: Rancho Cucamonga, Ca
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SMOKIN01TA
hehe, that is from my customer page which hasnt been updated in about a month, ive since beaten my own record there and so have others. i think it should be accurate once again in a few weeks just with a et change
until then they can just sub out ET for MPH
until then they can just sub out ET for MPH
#40
11 Second Club
Originally Posted by sandking
Are you part of Thunder Racing? If so, I am interested in a package that I found on the website today. Who do I contact when I call?
I hope i'm not wrong. lol