4.125 world products bare block?
spill it boii or gimme a set...lol. yes its blackmale 
06-12-2005, 10:42 PM
#42
Banned
iTrader: (2)
Join Date: May 2005
Location: Fort Worth, TX
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
they should be released by the end of the summer is what my buddy at Dart tells me...they were supposed to be released middle of this month was the first word i heard about it but now they're saying mid July.
06-12-2005, 10:51 PM
#43
TECH Veteran
iTrader: (12)
Join Date: Dec 2004
Location: Rockville, MD
Posts: 4,354
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by liftin'em on nittos
they should be released by the end of the summer is what my buddy at Dart tells me...they were supposed to be released middle of this month was the first word i heard about it but now they're saying mid July.
06-12-2005, 10:54 PM
#44
Banned
iTrader: (2)
Join Date: May 2005
Location: Fort Worth, TX
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
AFR, Edelbrock/Lingenfelter Performance, Dart are the only ones i know of that are doing their own castings that i know of, but there could be more i'm sure. all it means is better options and pricing for us the consumers! these Darts SMASHED the set of AFRs they were tested with...that's all i know.
06-12-2005, 11:06 PM
#48
Launching!
Join Date: Jul 2002
Location: Port Saint Lucie,Fl
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by liftin'em on nittos
= these Darts SMASHED the set of AFRs they were tested with...that's all i know.
06-12-2005, 11:08 PM
#49
Banned
iTrader: (2)
Join Date: May 2005
Location: Fort Worth, TX
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
i'll try to get the comparrison sheets tomorrow at work and scan them...the sets tested were both out of the box castings one from AFR and one from DART...the difference at .600" lift was ~20cfm for the Dart heads...like ~312AFR to ~335DART the darts are being worked on now for my new setup.
06-13-2005, 12:03 AM
#52
Banned
iTrader: (2)
Join Date: May 2005
Location: Fort Worth, TX
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
in my opinion it's like this....the AFR head is great, but more suited for a street/strip car with the entire setup designed around the head. the Dart head is more of an aggressive hard core race head designed to bolt on and make more power. Dart has always made some SERIOUS power with everything they made that i've been around.
06-13-2005, 12:34 AM
#54
Launching!
Join Date: Jul 2002
Location: Port Saint Lucie,Fl
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by liftin'em on nittos
Dart has always made some SERIOUS power with everything they made that i've been around.
06-13-2005, 07:27 AM
#55
10 Second Club + 14 Second Truck Club
iTrader: (3)
Join Date: Nov 2003
Location: Ne Pa
Posts: 493
Likes: 0
Received 0 Likes
on
0 Posts
i called Brodix and they told me that there was some talk about making an LSx head but no castings have been produced yet. and that it would be at least a year from the time they start the project until something is released.
07-11-2005, 03:29 PM
#57
Originally Posted by Mike Norris
Hey Guys,
A couple more notes I am able to pass on. The oil system is being changed slightly. It will be a dry sleeve setup as well as offering two different deck heights. We are trying to make this capable of going to 500ci. With the taller deck, a new manifold will be available as well as spacers for stock intakes. Extra head bolt holes as needed will be there as well as specific head for that application. The cam journals will be larger allowing more lift with less ratio on a larger base circle and the cams will be readily available for approximately the same pricing as today. Basically it will be able to be a direct bolt in capable of being a full race application.
As I said, be patient and more info will follow. Hope this helps.
Mike Norris
A couple more notes I am able to pass on. The oil system is being changed slightly. It will be a dry sleeve setup as well as offering two different deck heights. We are trying to make this capable of going to 500ci. With the taller deck, a new manifold will be available as well as spacers for stock intakes. Extra head bolt holes as needed will be there as well as specific head for that application. The cam journals will be larger allowing more lift with less ratio on a larger base circle and the cams will be readily available for approximately the same pricing as today. Basically it will be able to be a direct bolt in capable of being a full race application.
As I said, be patient and more info will follow. Hope this helps.
Mike Norris
Keith
07-11-2005, 08:18 PM
#58
SSU'S Vice Mod
Join Date: Jul 2004
Location: Hazard Co. Maryland
Posts: 2,391
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by liftin'em on nittos
225 cc afr heads to a similar cc Dart head...the chambers were stock afr and stock dart. i can't even remember what the chambers are on the afr heads.
More info?
