what to do?
Thread Starter
Launching!
Joined: Feb 2005
Posts: 241
Likes: 0
From: Omaha, NE
what to do? I have a 2000 SS M6, and i have been looking into a procharger for quite a while, but recently i have wondered what cam/heads would do for my car. I was wondering what kind of performance can i expect with doing cam/heads/headers/off road ypipe? And, about how much would it run for me to do that? I know that it will suck to take the motor out since i heard you have to take it out from the bottom of the car, or is that necessary to do these mods? Thanks!
Originally Posted by DamanZ28
I have a 2000 SS M6, and i have been looking into a procharger for quite a while, but recently i have wondered what cam/heads would do for my car. I was wondering what kind of performance can i expect with doing cam/heads/headers/off road ypipe? And, about how much would it run for me to do that? I know that it will suck to take the motor out since i heard you have to take it out from the bottom of the car, or is that necessary to do these mods? Thanks!
Taking the motor out is not necessary. The gains you will get and the power you will make is dependent on the heads/cam choice. Most heads/cam combos range from 400rwhp - 510rwhp. It is dependent on the setup.
A decent set of heads can set you back $1500 - $3000. A cam could range from $200 - $500 depending on which one you go with or if you get it used.
You are also going to need a decent clutch and a 12 bolt to support these mods.
