just got the head and cam done and drove it today but it runs poorly im shure i just need a tune i got it to idle desent but its at like 1200 rpm which i know is too high also the performance is not amazing im thinking between the 42# injectors and the 90/90 and the cam and heads the tune is really bad and this is the only reason its not fast it feels like it did before

-joe

 

Definitly get a tune. What size is the cam? With the new injectors and 90/90 it's defintly going to be running all over the place. 1200 rpms is way to high for idle.

 

thats what i thought the cam is 224/230 581/588 114 lsa

 

It would have been better if not for the injectors. Some of you guys KILL me by posting stuff like this.
My advice is go ASAP to the tuner and do not even try to run the motor hard, you'll be sorry.

 

What would happen if i run the motor hard i have gotten on it like 3 time but not for long maybe hold it wot for like 5 sec. what could have happened? Would i know it if something did happen? because it still runs and no wierd noises.

 

your gonna wash down the motor will fuel if you keep running it

 

do you think i have a problem already running it one night? i p0ut 43 miles on it. what would washing the motor down with fuel do?

 

It washes the oil off you cylinder walls causing your rings to burn up.

 

is there anyway i could check if this has happened?

 

If you only ran it for a little while you should be ok. Burning oil (blue exhaust smoke) would be one symtime You could also check your commpression. Get it tuned ASAP.

 

ok im getting my bin file tuned by someone off this site and this weekend im towing the car to fort myers to be tuned by jeremy furnado.