when u go above 7000 rpm !! check the PIX
#1
when u go above 7000 rpm !! check the PIX
G5X3 + patriot stage 2 ..... and when reached 7,400 rpm KABOOOM .. and here is the pix ...
we r lucky here in saudi arabia we have the ls1 every where so we took a short block from the junk yard for $ 420 .. lol
this is happened a week ago and we r driving the car now with new shortblock and stock heads ,,
patriot heads had some scratches near the valves ,, i think we still can use them ill take my time polishing them .. if not ill send them to the nearest pepsi factory so they can recycle them to a cans
please guys tell me if u need more pix for the heads or for the broken block .. just tell me what angel u want me to take the pic from ..
P.S the late engine was on a 2001 z28 ,
we r lucky here in saudi arabia we have the ls1 every where so we took a short block from the junk yard for $ 420 .. lol
this is happened a week ago and we r driving the car now with new shortblock and stock heads ,,
patriot heads had some scratches near the valves ,, i think we still can use them ill take my time polishing them .. if not ill send them to the nearest pepsi factory so they can recycle them to a cans
please guys tell me if u need more pix for the heads or for the broken block .. just tell me what angel u want me to take the pic from ..
P.S the late engine was on a 2001 z28 ,
#5
Originally Posted by 1QuickT-A
Damn! That looks familiar.. My old LT1 did that! lol
Why were you spinning the motor to 7400 rpms!!!!
Why were you spinning the motor to 7400 rpms!!!!
we were racing a modded ZR1 LT5 ... and we wanted to give the max , we wanted to teach him a lesson lool , we wanted to have the longest distance we can ,
it was a non nitrous race thats why we hit it to the limit ,
Trending Topics
#8
Originally Posted by 98Grnz28
They must be a high roller. I can't afford to blow engine up.
ill try to take the g5x3 out of the broken block and do some pictures ,
#15
TECH Fanatic
iTrader: (7)
Originally Posted by FiveSevenEagle
G5X3 + patriot stage 2 ..... and when reached 7,400 rpm KABOOOM .. and here is the pix ...
patriot heads had some scratches near the valves ,, i think we still can use them ill take my time polishing them .. if not ill send them to the nearest pepsi factory so they can recycle them to a cans
patriot heads had some scratches near the valves ,, i think we still can use them ill take my time polishing them .. if not ill send them to the nearest pepsi factory so they can recycle them to a cans
#17
Originally Posted by Ric
OUCH.
On a side note, how much would shipping be on an LS1 from Saudi Arabia to the US???
On a side note, how much would shipping be on an LS1 from Saudi Arabia to the US???
i dont know how much it will cost u if u want to ship from saudi arabia but i know it costs 2 much .. for instance when we bought the heads it cost us 500 + dollars to bring it here ! and when we shipped the rear end ( MOSER ) it cost us almost 1000 dollars ,
i really envy u guys , i wish i can go back there
P.S i was raised in the states , greele colorado , and my brother was born there and i used to go there every summer but after the 9/11 thing everything turned upside down ,
#19
Originally Posted by 98Grnz28
Is that piston ring hanging out from the valve? I would say that the heads are still good with alot of work. Me personally I would trash them.
i would do the same .. TRASH them .. but my partner wants to give it a try ,
he is a compression addict , he wants to mill them ...