PRC 6.0 stage 3 head ?
10-12-2005, 11:21 PM
#1
10 Second Club
Thread Starter
iTrader: (37)
Join Date: Aug 2005
Posts: 1,778
Likes: 0
Received 0 Likes
on
0 Posts
PRC 6.0 stage 3 head ? I was just wondering if anybody has these heads or have flowed a set. They are going on a 408. I dont want to buck up for the afr225s. Thank you
Last edited by ls1408cp; 10-13-2005 at 01:27 AM.
10-13-2005, 10:24 AM
#2
We've just finished a couple of sets & the did pretty well 
Off the top of my head they flowed 262 @ .400, & over 300 by .500" lift!! I think they peaked @ 320 cfm
This was all flowed on a 3.910 bore!!
Jason
TSP
Off the top of my head they flowed 262 @ .400, & over 300 by .500" lift!! I think they peaked @ 320 cfm This was all flowed on a 3.910 bore!!
Jason
TSP
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
