jdoyle

iTrader: (27)

i am currently running the TR224 on a 112 and am wanting to upgrade to the Ron Jeremy for some christmas time fun. Will my current setup allow me to just swap cams?

Comp 918s with like 3000 miles or so on em (Not shimmed)
853 Heads milled .030
Ferrea or Ferrera (w/e) 2.055 Intake Valves
Stock 6.0 Shortblock

lemme know if any more info is needed, or if you have one for sale thanks.

calongo_SS

iTrader: (7)

Not sure, but I bet you'll run into clearence issures. May want to upgrade to a dual spring as well.

Nate_Taufer

iTrader: (1)

No way it will clear. Stock headed p-v clearance is tight with that cam regardless. Plus your heads are milled .030 and have big 2.05" intake valves.

You could flycut but i dont know if you'd want to do that.

jdoyle

iTrader: (27)

well dang. thank you for the words of advice, time to keep searching, or maybe save my money for a rear?

jdoyle

iTrader: (27)

any ideas of what my limits would be? thanks in advance

Hennytime

iTrader: (33)

i would suggest ls6 stg2 heads from pariot cuz they are not milled. i just dont know what type of valves they use...good luck

orangeapeel

iTrader: (18)

Lol, I think that you want the cam just for the fact that it is named after a **** star with a celebrated *******!

darrensls1

I am now going to do everything I can to get this cam in my car with matching heads. Then next season when I see cars named "screaming chicken" or "blue dragon" I will feel right at home with my car and it's new name.

"The Hedgehog"

I'll have the name painted bright blue on each door, a picture of Ron will hang from my rearview mirrror and I'll make sure a group of girls are always hanging around.