Just wondering what a Z06 cam and a full exhaust would get me power wise. I know a guy who said he would give me his cam out of his Z06 to put in my 02 SS. Not sure the specs, and I can't find anyone with this setup here. Thanks, and no other power mods.

 

360-375rwhp
I've seen up to 390rwhp on a rare occassion.

 

I have heard of 380+ too but thats with ported heads.

 

damn that is quite a bit, could we get some dyno sheets?

 

Anyone else with experience with this cam? Any dyno #'s out there?

 

I installed an 02 LS6 cam in my car when it had 4K miles on it.
Mods consisted of Lid, Ported TB, ASP, LS6 cam & valvesprings, JH Longtubes & ORY thru SLP DD muffler, Rapid Motorsports Dynotune 376rwhp @ 361rwtq - Stock 241 heads Used 02 LS6 valvesprings & retainers stock pushrods

Car sounded stock and drove like stock even untuned. The tune did add power and made the car feel better throughout the powerband. I liked the cam but was disappointed in the power from idle to 4500rpms. The setup did not hit 350rwtq until 4300rpms! My current setup hits 350rwtq at 3000rpms. It did pull pretty hard from 5Krpms to 6500rpms.

Graph tuned vs untuned


Click Me

 

I'm getting 370 rwhp with my setup. I will be putting an MTI SII in a couple of months.

 

Mods and numbers in sig.

The dyno numbers where on a pretty street safe tune, the trap speed shows a more aggressive tune.. also, notice the DA..

 

Try this


https://ls1tech.com/forums/dynamometer-results-comparisons/154670-2002-ls6-cam-results.html

 

do a search, this subject has been discussed in GREAT detail on a number of occasions. Should be able to find whatever you're looking for.

 

I could tell a good difference in the car after mine. I have full bolt ons minus pulley. Car really takes off around 4400 and pulls hard to 6600.