what do ya think.Im ordering the cam package 2 tomorrow from TSP. these are the 2 cams i narrowed it down to.

 

do you want peak or under the curve power?
Peak - MS3
Bigger power band - Torquer

 

will they both get about the same hp&Tq gains

 

I have read the ms3 will make about 10hp more then the torquer.

 

the MS3 will have more up top than the Torquer. Lithium is right around that ballpark

 

get a MS3 and dont look back.

 

yeah, Walker and I aren't biased or anything

 

go ta go thanks

 

I searched for the perfect cam for me for awhile and it came down to the MS3

 

No doubt, the MS3 makes sick power up top. And the guys at TSP are very helpful

 

what is a good set of head for that cam....I am tring to acheive 450RWHP and a broad torque curve

 

you have to watch out for piston to valve clearance with the ms3 though. If your going with most of the aftermarket heads with different size valves then you will most likely have to flycut the pistons. So your probably better off just porting your stock heads!!!

 

the cnc'd darts with 2.02 1.60 valves will clear in most applications

 

I'm ordering the same package today with the ms3. Getting the ported ls6 oil pump and the 4.10 gear package as well. Might as well blow a good bit of my tax refund in one place. Good luck with whatever you decide on.