Patriot Predator Heads
09-27-2006, 09:55 AM
#81
Originally Posted by Steve Bryant
It's not always easy bringing a new product to market. I've worked for a manufacturer for over thirty years and development and production delays are common occurrences, especially when the company wants to really get things right. Also, things are not always within the control of the company developing the product. Sometimes it's suppliers, raw material availability, etc. Along this line, just consider the similar difficulties that ET Performance (heads) and World Castings have (heads and block) had in the past year.
It's hard to wait. But sometimes good things require patience.
Steve
It's hard to wait. But sometimes good things require patience.
Steve
Great statement Steve. We are currently making some changes to the molds. As Steve said, it takes time to make things happen.
03-25-2007, 08:14 AM
#94
9 Second Club
iTrader: (10)
Join Date: Apr 2006
Location: Oxford, Chester County,Pa
Posts: 508
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gunnar@Patriot
Yes sir, these are an aftermarket casting of our own design. We have spent over a year on the development of these heads. The Predator will have features such as thick deck, material added to rocker stands, raised valve cover rail, choice of 3 different runner sizes, and choice of combustion chamber and bore sizes. The parts used to build these heads will be only the best quality parts available. If you are in the market for an aftermarket head, our Predator castings will be a great option for you.
03-25-2007, 10:04 AM
#96
Staging Lane
Join Date: May 2005
Location: Richmond, Virginia
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Speed Inc has them for sale on their site. Not sure if that means they are ready to go or if there is still a wait. http://www.ls1speed.com/catagory.cfm...in%20/%20Heads
03-28-2007, 02:23 AM
#99
TECH Apprentice
iTrader: (2)
Join Date: Apr 2006
Location: Kuwait
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
when will we have pictires of inside the runners and the back of the valve guide pictured from the chambers of the ported heads?
can the stock rockers be used with the stock valve covers without modification?
flow numbers of the smaller ports on a 3.900 bore ?
and what about the new cams said to be avalable soon.
can the stock rockers be used with the stock valve covers without modification?
flow numbers of the smaller ports on a 3.900 bore ?
and what about the new cams said to be avalable soon.
