6.0L pistons??
04-05-2006, 03:51 PM
#1
On The Tree
Thread Starter
iTrader: (9)
Join Date: Dec 2005
Location: Lexington, Ky
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
6.0L pistons?? What are the specs on the stock, dished 6.0L pistons? My 346 took a dump so I bought a 6.0L shortblock until I have the money for a 408. I had bought TEA stage 3 5.3L heads and the t-rex to put in my car, after flycutting I inspected the bottom end and discovered that my oil pump pick up tube bolt had come loose and chewed up the bottom end. Long story short I don't want to fly cut again so I'm trying to decide what cam I can run without flycutting, so.....do the dished pistons give me any more clearance?
I was thinking about running something like what Patrick G is running; 224/228 .637/.639 110(+0) but with a little more duration, if possible.
I was thinking about running something like what Patrick G is running; 224/228 .637/.639 110(+0) but with a little more duration, if possible.
