I want a stealth2 cam but what heads?
04-25-2006 | 09:24 PM
#6
i have the cam with prc ls6 heads, but its not big enough for me and is coming out in about 2 weeks. pm me if you would want the cam and valve springs. it idles very nicely and peaks around 6300 i would say
Trending Topics
04-26-2006 | 06:52 AM
#8
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 16
From: BFE
That cam likes high compression.
I would look at like 11.2:1 SCR
This in turn will raise the DCR and increase low end trq
IVC is 48 on that cam and it will peak at 6300 (induction induced)
Stage II TEA heads would be one of the best due to their phenomonal exhaust numbers. 62 cc with .045 gasket or 60 cc with stock .053 gasket
Now if you are gonna run 93 octane fuel, I would even look at 11.5:1 for even better results.
I would look at like 11.2:1 SCR
This in turn will raise the DCR and increase low end trq
IVC is 48 on that cam and it will peak at 6300 (induction induced)
Stage II TEA heads would be one of the best due to their phenomonal exhaust numbers. 62 cc with .045 gasket or 60 cc with stock .053 gasket
Now if you are gonna run 93 octane fuel, I would even look at 11.5:1 for even better results.
Last edited by PREDATOR-Z; 04-26-2006 at 07:05 AM.