sss275hp

I have a 2003 5.3l in my truck and am going to put ls6 heads milled back to stock compression on and was going to put a cam in. I was thinking about the voodoo cam 60511 it has .567 lift. Do you think i should have the piston cleaance i nedd with .030 off the head with this lift. Also after this conversion should i still be able to run a full 150 wet shot of nos still. I have 3200 stall and 3.73 gears.Stock bottom end. Also anybody have a recomended pushrod lenght.

orangeapeel

iTrader: (18)

Well, the PTV can't be determined off of lift alone. What are the rest of the specs?....Yeah I could go look at that particular voodoo cam, but I figured that you have them close by.

sss275hp

http://www.holley.com/data/Products/Technical/60511.pdf

sss275hp

I think it should work fine but just getting a popular opinion.

orangeapeel

iTrader: (18)

Yeah, It looks like it will fit according to the cam card. 222/228 .567/.567 113°+4

sss275hp

Thanks just wanted to make sure.

Quik

iTrader: (7)

what he said