torquer v2 dyno results
Thread Starter
TECH Regular
Joined: Sep 2005
Posts: 446
Likes: 1
torquer v2 dyno results Im kinda disappointed in numbers
base run was max power 335 max torque 335
A/f was at 12 across until about 5000 was below 10 til 6200
after tune max power was 388 max torque was 369
a/f was 13 across the board
tune was by NLP
here is graph
hopefully with ls6 and underdrive I can break 400 mods are in sig except true duals instead of loudmouth
base run was max power 335 max torque 335
A/f was at 12 across until about 5000 was below 10 til 6200
after tune max power was 388 max torque was 369
a/f was 13 across the board
tune was by NLP
here is graph
hopefully with ls6 and underdrive I can break 400 mods are in sig except true duals instead of loudmouth
Last edited by Slow00ls1T/a; Jun 20, 2006 at 08:15 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
something definitely isn't right,that is within a few hp of my setup when i was cam only with a 228/228.even though you still have the ls1 on there i would think you are down on power,with a ls6 you should be in the 430 range but i don't think you will pick that much up so something is out of whack.
Im about to have the exact same setup, maybe ill send the cam back to get something bigger or the heads back to get some more compression.
That setup should have definetly broke 410rwhp though, good luck getting some better #'s
That setup should have definetly broke 410rwhp though, good luck getting some better #'s