View Poll Results: meanest sounding cam
T-rex
228
58.02%
MS3
86
21.88%
G5x4
53
13.49%
FM 15
26
6.62%
Voters: 393. You may not vote on this poll
poll: meanest sounding cam
#25
!LS1 11 Second Club
Originally Posted by import slayer
trex
ms3
gx4
ms4
ms3
gx4
ms4
#26
TECH Senior Member
Originally Posted by cws T/A
T REX V2 242/248 @ .050 .608''/.612'' 110 LSA 25 degree overlap
MS4 239/242 @ .050 .649''/.609'' 111 LSA 18.5 degree overlap
Futral F15 236/239 @ .050 .600''/611'' 111 LSA 15.5 degree overlap
MS3 237/242 @ .050 .603''/609'' 112 LSA 15.5 degree overlap
G5X4 ? ? ? ?
Overlap determines the idle chop. higher the number , rougher the idle .
MS4 239/242 @ .050 .649''/.609'' 111 LSA 18.5 degree overlap
Futral F15 236/239 @ .050 .600''/611'' 111 LSA 15.5 degree overlap
MS3 237/242 @ .050 .603''/609'' 112 LSA 15.5 degree overlap
G5X4 ? ? ? ?
Overlap determines the idle chop. higher the number , rougher the idle .
Also as mentionned previously as well, the type of exhaust does affect the note as well (chambered, spiral, catback, duals, straight thru etc.....)
#27
TECH Fanatic
iTrader: (1)
Join Date: Nov 2005
Location: Goldsboro, NC
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Xtnct00WS6
You can also just lower the idle of a medium size cam to make it sound pretty mean.
#30
TECH Fanatic
iTrader: (3)
Join Date: Apr 2006
Location: Texas
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by OJmobileII
how do u calculate overlap?
2. Divide that number by four
3. Subtract the lobe seperation {LSA} {LCA} of the camshaft from that number
4. Multiply that number by two
5. Overlap
Int 237 + Exh 242 = 479 / 4 = 119.75 - 112 Lsa = 7.75 * 2 = 15.5 overlap
#33
Launching!
Join Date: Feb 2006
Location: Cabot Arkansas
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
Gosh by that calculation my 231/237 cam is 10 degree overlap. I think it lopes pretty good but at the same time the TREX is 2.5x as lopey. I think mines just right
#39
10 Second Club
iTrader: (11)
Originally Posted by cws T/A
1. Add the Int and Exh duration .
2. Divide that number by four
3. Subtract the lobe seperation {LSA} {LCA} of the camshaft from that number
4. Multiply that number by two
5. Overlap
Int 237 + Exh 242 = 479 / 4 = 119.75 - 112 Lsa = 7.75 * 2 = 15.5 overlap
2. Divide that number by four
3. Subtract the lobe seperation {LSA} {LCA} of the camshaft from that number
4. Multiply that number by two
5. Overlap
Int 237 + Exh 242 = 479 / 4 = 119.75 - 112 Lsa = 7.75 * 2 = 15.5 overlap
#40
TECH Resident
iTrader: (28)
Join Date: Sep 2004
Location: norcal
Posts: 987
Likes: 0
Received 0 Likes
on
0 Posts
boy I wish i had a video camera so i could give you guys a sound clip of the t-rex through straight pipes, ricers dont appreciate the sound very much as a matter of fact I think some of them **** themselves at the stop light lol