Help!!! can't tighten crank bolt A4
12-07-2001, 07:30 PM
#1
TECH Apprentice
Thread Starter
iTrader: (70)
Join Date: Nov 2001
Location: Texas
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Help!!! can't tighten crank bolt A4 Helping a friend install ASP pulley. need info on tourqueing down bolt!!!? Pulley is spinning as we turn the bolt.
12-07-2001, 07:32 PM
#2
Teching In
iTrader: (1)
Join Date: Nov 2001
Location: north
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help!!! can't tighten crank bolt A4 not sure what the recommended method is. I pulled off that little plastice cover between the belhousing and a4 and stick a screwdriver in between teeth ont he flywheel. Worked well.
12-07-2001, 08:23 PM
#4
10 Second Club
iTrader: (1)
Join Date: Nov 2001
Location: Boggy Creek
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
Re: Help!!! can't tighten crank bolt A4 Dan,just wedge a 3/4 in. ratchet drive between one of the gaps in the pulley and spin it till it stops against something that will not break off,then start tightning the bolt back down.
