Alright, well I've decided to block off my egr. I can't get the tubes bent right and it looks horrible. So I went ahead and ordered the PACEGR block off kit from Pace. Now, from what I understand it doesn't come with something to block the hole on the intake manifold. Any suggestions? I know some people had to have done this. What did you use, where did you get it, and what did you have to do to put it in? I think thats it. TIA

Jason <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />

 

Just buy a rubber pipe/freeze plug from your local hardware store. It has a threaded insert that makes the rubber expand within the hole when tightened. Beats me as to the exact size though.

 

I understand that, but I didn't. So what else can I do? Also, what did you guys do with the wire harness that just hangs there?? TIA

Jason

 

Just wrap it up with electrical tape.

 

What I did...I switched the passenger side and driver side and from there bent them to fit. This is on a 2000. Doing this, you won't throw a code as you would by just plugging it. What type of headers do you have. I did this w/ Macs.

 

Huh? switched what to where?

Jason

 

The driver side fits better on the passenger side header and vice versa. You will still have to bend them some.

 

There is no drivers side EGR..... <img src="images/icons/confused.gif" border="0">

Jason