H/C setup for 450RWHP N/A

Reply Subscribe

Thread Tools

Search this Thread

Nov 30, 2006 | 08:43 PM

NYRDRMSS

Thread Starter

Teching In

Joined: Sep 2005

Posts: 22

Likes: 0

H/C setup for 450RWHP N/A

What H/C setup on a full bolt on 346 will consistently produce 450 RWHP N/A?
I have been leaning toward TSP 233/239 with a Patriot Stage II setup but now I am thinking there may be a better setup. Maybe something that works well with spray also? Thanks for any info.

Nov 30, 2006 | 08:59 PM

BriancWS6

10 Second Club

iTrader: (18)

Joined: Mar 2004

Posts: 3,910

Likes: 1

From: The Garage

Go to the dyno results section and do some searching for specific rwhp numbers or cams. Or just scroll down and read the titles. There are TONS of results with numerous setups. Good luck.

Nov 30, 2006 | 09:18 PM

junior28570

10 Second Club

iTrader: (22)

Joined: Feb 2006

Posts: 536

Likes: 0

From: coastal N.C.

^^^^ or just follow the recipe in his sig

Nov 30, 2006 | 11:14 PM

WS6FTW

On The Tree

Joined: Jan 2006

Posts: 147

Likes: 0

I have a friend that makes 441 all day long on ported LS6's and a MS3.

Dec 1, 2006 | 07:48 AM

Sigforty

11 Second Club

Joined: Jun 2005

Posts: 1,537

Likes: 0

From: Was New Orleans, but swam to Baton Rouge

I did 452 rwhp 423 rwtw with Dart 205s and a Futral F14 cam. This was without a Fast 90 and Electric WP. After I did the cam they came out with the Highlift that makes a good 10 rwhp more than the original. I also daily drive the car everyday 60 miles a day.