2002 maf ends
Thread Starter
Teching In
Joined: Nov 2001
Posts: 19
Likes: 0
2002 maf ends Anyone know what size maff ends come on a 2002 ss,I was thinking of getting some 75mm ends but am not sure if this is smaller than stock.
THANKS
2002 Ann.SS A4 with SLP opt.
[ January 02, 2002: Message edited by: Pro Stock John ]</p>
THANKS
2002 Ann.SS A4 with SLP opt.
[ January 02, 2002: Message edited by: Pro Stock John ]</p>
TECH Fanatic
Joined: Nov 2001
Posts: 1,080
Likes: 0
From: HP Illinoiz
Re: 2002 maf ends Just dont buy the WHISPER ends...
I got a set..and even tho I didnt go nutty on tightening em down
to the sensor, to corners cracked inside of 5 months <img src="gr_images/icons/mad.gif" border="0">
Its still sealed ok..but the fact that the corners cracked just pisses me off...
I got a set..and even tho I didnt go nutty on tightening em down
to the sensor, to corners cracked inside of 5 months <img src="gr_images/icons/mad.gif" border="0">
Its still sealed ok..but the fact that the corners cracked just pisses me off...
Trending Topics
Re: 2002 maf ends If they cracked, you tighten them too far.
Had the same Whisper MAF ends on two cars. ZERO problems.
[ December 28, 2001: Message edited by: WILWAXU ]</p>
Had the same Whisper MAF ends on two cars. ZERO problems.
[ December 28, 2001: Message edited by: WILWAXU ]</p>
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Re: 2002 maf ends Yes the are worth it for the $. I have had mine for about a year and absolutely no problems with the Whisper ends. I also know plenty that have them and I have never heard of a problem with them.
Re: 2002 maf ends You should contact Wilwaxu. I believe he has the ends for $75 and is a good guy to deal with. If you are running rich it should help with leaning it out. If you have a 2000 you will probably run very lean like me. Reson being GM decided in 2000 to use 22# injectors. I am upgrading mine to 28# soon to run better with my Nitrous. Hope this helps. <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
Re: 2002 maf ends Warlok,
Does 01's and 02's run a little richer than the 00'? I've heard a lot of guys running too lean with ends or ported meters, but not much info on 01 or 02 cars with ends or ported meters. Thanks for any help.
Does 01's and 02's run a little richer than the 00'? I've heard a lot of guys running too lean with ends or ported meters, but not much info on 01 or 02 cars with ends or ported meters. Thanks for any help.
Re: 2002 maf ends Thanks for the plug Warlock <img src="gr_images/icons/wink.gif" border="0">
The 2001/02 run ALOT richer than the 2000's. We have larger injectors just for starters.... The MAF ends also raise the timing, which our cars need dramatically!
My car picked up 7hp & 8tq at the rear wheels with the addition of just the MAF ends, I think that's more timing than air flow <img src="gr_images/icons/wink.gif" border="0">
The 2001/02 run ALOT richer than the 2000's. We have larger injectors just for starters.... The MAF ends also raise the timing, which our cars need dramatically!
My car picked up 7hp & 8tq at the rear wheels with the addition of just the MAF ends, I think that's more timing than air flow <img src="gr_images/icons/wink.gif" border="0">
Re: 2002 maf ends I have a set of fully-ported MAF ends that I'm asking $50 + shipping for. I saw an additional 2 degrees of timing from them. They came off when I had the Ed Wright programming done. You can see pics of them at my website under parts for sale.
__________________
On The Tree
Joined: Nov 2001
Posts: 112
Likes: 0
From: Duluth, GA
Re: 2002 maf ends Well this is good news to me. My stock dyno was on the low side and looking at the graph one of my first hunches was that it was running too rich. But, I had heard that the 2000's were pinging with ported ends, and I just assumed that 01's would as well. Looks like I will be giving the ported ends a try.
Re: 2002 maf ends [quote]Originally posted by Warlock:
<strong>Most aftermarket are made of plastic. They have a higher flow rate than stock ends and the don't retain heat like the stock metal ones.</strong><hr></blockquote>
I've only found one place where they sell the plastic MAF ends. Fast Toys. I would like to know if there is other places that sell the plastic ones and if you can buy colored plastic MAF ends. Thanks
<strong>Most aftermarket are made of plastic. They have a higher flow rate than stock ends and the don't retain heat like the stock metal ones.</strong><hr></blockquote>
I've only found one place where they sell the plastic MAF ends. Fast Toys. I would like to know if there is other places that sell the plastic ones and if you can buy colored plastic MAF ends. Thanks