Fuel rails
Thread Starter
Adkoonerstrator
iTrader: (4)
Joined: Nov 2001
Posts: 21,420
Likes: 0
From: Deep in the seedy underworld of Koonerville
Fuel rails What are the fuel rails made of? Stainless?
Does anyone know where to find some end caps that have AN thread apdapters on them for the tubes?(kinda like the stock schrader valve cap on the end of the driverside rail)
I was going to modify a stock rail myself with compression fittings but, I want a little cleaner looking rail.
Thanks.
Johnnie
[ January 10, 2002: Message edited by: XLR8NSS ]</p>
Does anyone know where to find some end caps that have AN thread apdapters on them for the tubes?(kinda like the stock schrader valve cap on the end of the driverside rail)
I was going to modify a stock rail myself with compression fittings but, I want a little cleaner looking rail.
Thanks.
Johnnie
[ January 10, 2002: Message edited by: XLR8NSS ]</p>
Re: Fuel rails It's actaully stainless.
some stainless is magnetic <img src="gr_stretch.gif" border="0">
aeroquip makes braze on fittings in steel for just such a thing.
unfortunately the only one they make that fits the rail is -10 AN. I don't mind big lines though <img src="gr_grin.gif" border="0">
aeroquip P/N FCM2875, summit carries them
happy brazing <img src="gr_stretch.gif" border="0">
some stainless is magnetic <img src="gr_stretch.gif" border="0">
aeroquip makes braze on fittings in steel for just such a thing.
unfortunately the only one they make that fits the rail is -10 AN. I don't mind big lines though <img src="gr_grin.gif" border="0">
aeroquip P/N FCM2875, summit carries them
happy brazing <img src="gr_stretch.gif" border="0">
Re: Fuel rails you can also use Aeromotive billet rails from a 5.0 mustang <img src="gr_stretch.gif" border="0">
It seems the injector angle and spacing are the same, based on the tech line at Aeromotive and personal experimentation <img src="gr_stretch.gif" border="0"> You'd need to make the mounts though.
It seems the injector angle and spacing are the same, based on the tech line at Aeromotive and personal experimentation <img src="gr_stretch.gif" border="0"> You'd need to make the mounts though.
Thread Starter
Adkoonerstrator
iTrader: (4)
Joined: Nov 2001
Posts: 21,420
Likes: 0
From: Deep in the seedy underworld of Koonerville
Re: Fuel rails [quote]Originally posted by Pro Stock John:
<strong>You can get custom billet rails from www.ls1speed.com. Already threaded.</strong><hr></blockquote>
Thanks everyone
John - I traded emails with Tom already and they're just not quite right for what I'm looking for.
Thanks
Harlan, you'll have mail shortly. <img src="gr_stretch.gif" border="0">
Johnnie
<strong>You can get custom billet rails from www.ls1speed.com. Already threaded.</strong><hr></blockquote>
Thanks everyone
John - I traded emails with Tom already and they're just not quite right for what I'm looking for.
Thanks
Harlan, you'll have mail shortly. <img src="gr_stretch.gif" border="0">
Johnnie
