fws98ws6tt

some one was good enuff to tell me were on our atap how to find what % were 100% was lite granding now at 4.5 its at 100% open .you get more help here! thanks yall michael <img src="gr_grin.gif" border="0">

J'sRamAir

[quote]Originally posted by 02 'Hawk:
<strong>still looking. is my 4.3 low enough to justify grinding to 4.6... <img src="gr_stretch.gif" border="0"> <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" /> </strong><hr></blockquote>

I think you should go for it.

Damian

iTrader: (89)

[quote]Originally posted by 02 'Hawk:
<strong>still looking. is my 4.3 low enough to justify grinding to 4.6... <img src="gr_stretch.gif" border="0"> <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" /> </strong>
<hr></blockquote>


Most definately, you won't be getting the most out of your car until you see true WOT.


Josh

02 'Hawk

OK, grind a LITTLE, check GOSUB:RETURN

Like that, eh? <img src="gr_stretch.gif" border="0"> don't go beyond 4.6 or beyond 4.7?

or stop shy of 4.6. I did the tb bypass today finally, and the blade can open some more to be 90 degrees. not REAL bad, but can tell its not opened flat. thx guys. hand to have scanmster hooked up/mounted all the time.

Chris

EDIT: Code at 4.7, got it.

[ January 15, 2002: Message edited by: 02 'Hawk ]</p>

Judd

iTrader: (1)

If you go over 4.6 volts can you bend the little metal tab that hits the aluminium stop?

02 'Hawk

i think you can go to 4.69...most stop before 4.7 but im gonna grind ever so slowly and recheck it. close counts.

btw, check some vids/pics at the link in my new sig... My Z28 vid my bro shot is in there, 2 of them. what a beast that car was...

Damian

iTrader: (89)

[quote]Originally posted by Judd:
<strong>If you go over 4.6 volts can you bend the little metal tab that hits the aluminium stop?</strong><hr></blockquote>


If you have traction control, you can adjust your cable to have slack and not complete pull the blade back to the stop.