11 Bravo

iTrader: (3)

As an A4 guy, I am curious how streetable this cam is with programming and how well it idles.

SAINT WS6

Same here, I'm looking at getting this exact same thing but with the Stage 2 Heads, Valvetrain, G5 Cam, and the new Holley Intake. How well does this cam idle? Do you have an problems like the AC turning off? Is it comfortable to drive around town?

RyanJ

he can answer this better than i can, but im sure with the custom programming, they've taken care of all that.

01 SS Jay

That is very impressive. Are the 01 and 02 heads the same? If so, I may have to give this bad boy a try. Id like to see what kinda hp you would get thru a M6.

AgaveCorvette

Hey Lou, how much do you want for that cam + valvetrain as a package? I'm doing headwork for a buddy of mine and those numbers look excellent. I was going to put him in a T1 but that G5 looks like it's a good performer.

Awesome02WS6

I would also be interested if it passed emissions. Do the T1/B1/C1 all pass emissions?

thebadbat

Hey Lou, how much could I get one of those, and have installed and tuned in-house??? I'll be making several trips to Texas in the coming months, so lemme know! Its been a while since Ive been down, excited to see some of the new projects... Last time I was down there was a LT-1 TA(red), that was having a complete overhaul! <img src="gr_images/icons/cool.gif" border="0">

Anyways, lemme know, or email me, thanks again!

TJ

Ram Air Tony

iTrader: (2)

above is the graph <img src="gr_stretch.gif" border="0">

it idles at 950 with custom work.....with the 3200 Yank it is just enough to keep it from surging but it probably could use a little more stall but it is A OK for now <img src="gr_stretch.gif" border="0">

alls I can say is it drives tame until ya mash it down, then that bitch screams !!!!!!!!!!

<img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> RAT is a happy mo fo <img src="gr_stretch.gif" border="0">

thanks

R
A
T

[ January 28, 2002: Message edited by: Ram Air Tony ]</p>

JasonShort

iTrader: (242)

Those are some SICK numbers Tony!!! Cant wait to see some track times!

BTW how is the Z06?

Congrats again <img src="gr_stretch.gif" border="0">
Jason

BIGBOS

Can you post the specs of that cam.......

I find that very interesting....... <img src="gr_stretch.gif" border="0">

SAINT WS6

Is the idle livable or is it so choppy it's annoying?

Ram Air Tony

iTrader: (2)

the idle is very nice at 950, could probably be OK with 800 or 850 too

at cruise you cant even tell, from a launch, it jsut flat GETS IT....doesnt rip the tires, just GOES !!!!!

give the LG guys a shout, cuz this cam is a PLEASER !!!

thanks

R
A
T

J'sRamAir

The 'specs' that Lou stated are a tad higher than what I want. I'm actually more interested in what kind of springs/rods/retainers you are using with this cam. <img src="graemlins/gr_judge.gif" border="0" alt="[judgement]" />

Ram Air Tony

iTrader: (2)

comp 918 springs and pushrods (not sure on the retainers....I think they are stock??? ) or whatever ya use with the 918s

R
A
T

J'sRamAir

I guess the 'age old' question is: can I run this cam without programming? Of course, it's best to get programming, but can I run this thing for a month or two or whatever until I can get the computer programmed? I have an M6 BTW.

[ January 28, 2002: Message edited by: J'sRamAir ]</p>

RyanJ

Yes i belive you can run it with no programming with an M6. 6600 limiter with the HPP3 will limit you a bit, and idle will be a pain i think since you'll have to drill to raise it. other than that...you'll be fine. they have a 114 LSA version if you would like to worry a bit less about idle surging and stuff.

Ryan

Louis

iTrader: (7)

Hi Guys,

Thanks to Tony for believing me when I told him that we had our best cam yet. (and he got my last pulley)

At any rate, we are coming close to pricing of the other cam special going around but we cannot match it. The cam package installed will be $1499. (G5 cam on 112 lobe spread, 918 springs, and chrome molly push rods) If you want the hypertech, at the time of the sale, we will discount it to $299. Custom programing, like RAT got will be $500 + shipping.

If you get headers at the same time, we will discount the header install 20%.

These are some great numbers. We have been working very hard at this cam. You can also choose a G5 cam on a 114 lobe seperation. I hope we can work with some of you in the near future.

If you have a C5, we can supply you with our new Stainless steel L G Longtubes.

Thanks,

And keep it on the ground Tony.

Lou Gigliotti LG Motorsports

RyanJ

Lou,

Is there a time that I could come by the shop and talk with you about the cam. Ive talked to Louis on numerous occasions, but he's usually in school when Im free to stop by the shop. I personally know Jim McCool and his associate at your house so in theory I could come by the new house and talk to you. Id like to go over some stuff about the cam theory if you'd let me, Im curious about a few things. If you'd like, ask Louis about Ryan Jackson...or you could ask Jim or JP if you'd like someone to vouch for my knowledge or character.

Ryan

[ January 29, 2002: Message edited by: The Underdog ]</p>

Louis

iTrader: (7)

Just stop on by. Call to make sure that I am in the shop, but stop by any time. (the house is complete).

Later,

Lou Gigliotti

RyanJ

Well, damn. you can tell i havent talked to anyone since i been working nights. congrats on the house and all. ill try to stop in sometime this week.

Ryan