Patriot 243 heads and Comp XER 224/228 111 +2
12-29-2006 | 02:18 PM
#22
I am pretty sure the info to be correct. The combution chamber shape is not much different than the aftermarket Gen1 heads out there. I know they are .006" flat milled and .008" angle milled per 1cc removed.
12-29-2006 | 05:44 PM
#23
I know that's the guideline, but with them not being even, I would like to know the actual EXACT measurements at each level. As in .006 for the first CC, .0065 for the 2nd, etc.
