Low dyno and what to monitor with autotop to look for problem
#1
Launching!
Thread Starter
Join Date: Nov 2001
Location: Westminster, CO
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Low dyno and what to monitor with autotop to look for problem
There is a guy in my club who dyno'ed low at 280rwhp and he asked me to hook up autotap to see if we can find a problem, so I want to see just what to look for. I'm thinking the following:
O2 sensors
knock retard
timing advance
engine rpm
throttle position
misfires
Anything else? This is apparently a very lightly mod'ed car, MTI lid, Holley filter, FRA and that is it.
O2 sensors
knock retard
timing advance
engine rpm
throttle position
misfires
Anything else? This is apparently a very lightly mod'ed car, MTI lid, Holley filter, FRA and that is it.
#3
Launching!
Thread Starter
Join Date: Nov 2001
Location: Westminster, CO
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Re: Low dyno and what to monitor with autotop to look for problem
[quote]Originally posted by Terry Burger:
<strong>He should sell his LT1 and get an LS1 car. <img src="gr_images/icons/wink.gif" border="0"> </strong><hr></blockquote>
Yep that would explain it <img src="gr_grin.gif" border="0"> Someone slipped an LT1 into his 98 before he bought <img src="gr_grin.gif" border="0">
<strong>He should sell his LT1 and get an LS1 car. <img src="gr_images/icons/wink.gif" border="0"> </strong><hr></blockquote>
Yep that would explain it <img src="gr_grin.gif" border="0"> Someone slipped an LT1 into his 98 before he bought <img src="gr_grin.gif" border="0">