Ok, so, in the near future i'm going to be doing a cam swap on my 1998 T/A. The cam is a 230/232 .595 .598 on a 114lsa. What I need to know is, what length pushrods do I need, and what type should I get. I'm also gonna put in patriot gold duals, a ported ls6 oil pump, and a double roller timing chain. Anything else i'll need to upgrade while i'm in there?

 

7.4's

 

Ok, that's what I thought. IS that the stock length? And preferred brands/types, or should I just go with comp chromemoly's?

 

The stock length is less than 7.4, its more like 7.3xx. Comps are great pushrods, pm sent to ya too.

 

manley pushrods. 7.400"

 

I have the exact same cam but with milled AFR 205's, and I used the 7.4's.

This is a good cam you'll like it.

I put down 396@6200rpms on a baseline tune before my DS took a dump.