Head Gaskets & Bolts Help Needed
#1
Thread Starter
LS1Tech Premium Sponsor
iTrader: (4)
Joined: Nov 2001
Posts: 4,229
Likes: 2
From: Texas!
Head Gaskets & Bolts Help Needed
We're about ready to bolt together the stock ci motor so now its time to pick a head gasket & head bolts <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Does anyone offer aftermarket head bolts?
Whats the best plan for a head gasket that will see nitrous???
Opinions <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thanks!
Does anyone offer aftermarket head bolts?
Whats the best plan for a head gasket that will see nitrous???
Opinions <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thanks!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#2
Re: Head Gaskets & Bolts Help Needed
Cometic gaskets and head studs is a good start, I was going to use the stock head bolts and gaskets but others have convienced me not..studs are 200.00 and the gaskets are 80.00 a piece.... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />