408 with prc 2.5 5.3 heads?
03-22-2007, 08:07 AM
#1
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Sep 2004
Location: TEXAS!!!
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
408 with prc 2.5 5.3 heads? I just got a 408 and am wondering - will my tsp prc 2.5r 5.3 heads work well with the 408? Does anyone have any experience with this setup? It looks like EVERYONE is running afr 225s or et 245s on their 408's.
03-22-2007, 09:07 AM
#2
TECH Enthusiast
iTrader: (40)
Join Date: Jan 2006
Location: Scottsboro, AL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
With that many cubes, you might want something with a tad bit bigger runner to supply it with enough air...
I'd probably just call up one of the sponsors and get their opinion as well.
Good luck.
I'd probably just call up one of the sponsors and get their opinion as well.
Good luck.
03-22-2007, 10:10 AM
#6
TECH Enthusiast
iTrader: (40)
Join Date: Jan 2006
Location: Scottsboro, AL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nomorews6
blast - i was hoping i could keep because i have the fast port matched to them
Well man, I'm not saying you can't by any means...those may make great power on what you are building...
I was just throwing a thought out there....call TSP...they'll set you straight!
03-22-2007, 10:16 AM
#7
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: Sep 2004
Location: TEXAS!!!
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
hehe yeah - the only reason i have questions on this are because:
1) no one is really running them on a 408
2) the guy i know of who is says they werent doing too well on the 408 even though it appeared that he was making good power
strange! hoping for TSP to chime in
1) no one is really running them on a 408
2) the guy i know of who is says they werent doing too well on the 408 even though it appeared that he was making good power
strange! hoping for TSP to chime in
Trending Topics
03-22-2007, 12:46 PM
#16
TECH Senior Member
Yes you can run them, you will prolly leave 20>25rwhp (guestimate)
I use those on my 370 and they are making good power, not the best but good. Don't go too big on the cam, use like a 240/244 and maximise compression and DCR
I use those on my 370 and they are making good power, not the best but good. Don't go too big on the cam, use like a 240/244 and maximise compression and DCR
03-22-2007, 01:49 PM
#18
Originally Posted by PREDATOR-Z
Yes you can run them, you will prolly leave 20>25rwhp (guestimate)
I use those on my 370 and they are making good power, not the best but good. Don't go too big on the cam, use like a 240/244 and maximise compression and DCR
I use those on my 370 and they are making good power, not the best but good. Don't go too big on the cam, use like a 240/244 and maximise compression and DCR
you have the original version too right ?
