Anyone running a 4.125 inch stroke
10-16-2002, 10:52 AM
#1
Launching!
Thread Starter
Join Date: Apr 2002
Location: chicago
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Anyone running a 4.125 inch stroke I was interested in building my own stroker with a 6.0 truck block and a 4.125 stroke. I hear you can bore the block itself to 4.06 which combined with that stroke should produce a 427.
I was wondering if anyone in hear has this same setup and if so maybe they can tell me what kinda numbers they acheived. Also, maybe there head and cam setup as well.
I was wondering if anyone in hear has this same setup and if so maybe they can tell me what kinda numbers they acheived. Also, maybe there head and cam setup as well.
10-16-2002, 11:08 AM
#2
TECH Resident
Join Date: Nov 2001
Location: Chicago, IL
Posts: 894
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone running a 4.125 inch stroke I wanna know too. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> 3.905 bore and the 4.125 crank should be close to a 396. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
10-16-2002, 11:26 AM
#3
Re: Anyone running a 4.125 inch stroke One guy is running around with a 4.100" x 4.125" motor. Put down some great numbers <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> With a 3.9" bore, I think you will run into major clearance issues.
