Stroker cam ????
10-16-2002, 07:37 PM
#1
On The Tree
Thread Starter
Join Date: Dec 2001
Location: IL
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Stroker cam ???? What would be a good BIG cam for a 382 stroker(not an all-bore)???I do mean BIG!!!!!TIA
<small>[ October 16, 2002, 07:40 PM: Message edited by: Slammed Vette ]</small>
<small>[ October 16, 2002, 07:40 PM: Message edited by: Slammed Vette ]</small>
10-16-2002, 09:29 PM
#2
FormerVendor
iTrader: (3)
Join Date: Aug 2002
Location: Albany, New York
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Re: Stroker cam ???? Bigger isn't always better! What kind of heads are you using? How much compression will you have? Auto or stick?
I am finishing up a 418 motor that is using a .644/.630 with a 238/244 duration on a 112 LCA. A cam like that would kill a 382.
Trying calling CompCams tech line and see what they say. Give us some more data on your setup!
I am finishing up a 418 motor that is using a .644/.630 with a 238/244 duration on a 112 LCA. A cam like that would kill a 382.
Trying calling CompCams tech line and see what they say. Give us some more data on your setup!
10-17-2002, 04:17 PM
#3
On The Tree
Thread Starter
Join Date: Dec 2001
Location: IL
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Re: Stroker cam ???? Bigger isn't always better! What kind of heads are you using?I have stage III heads now and I'm contiplating going to a stroker with the or a set of 2.05-1.60 How much compression will you have?probably around 10.8-11.0 Auto or stick? A4
I have a 226/234 cam in it now and it runs great after a lil LS1Edit.So tuning will not be a problem
I am finishing up a 418 motor that is using a .644/.630 with a 238/244 duration on a 112 LCA. A cam like that would kill a 382.
Trying calling CompCams tech line and see what they say. Give us some more data on your setup!
I have a 226/234 cam in it now and it runs great after a lil LS1Edit.So tuning will not be a problem
I am finishing up a 418 motor that is using a .644/.630 with a 238/244 duration on a 112 LCA. A cam like that would kill a 382.
Trying calling CompCams tech line and see what they say. Give us some more data on your setup!
