Is it possible for me to achieve 400 rwhp with the following?
10-18-2002, 09:37 AM
#1
Teching In
Thread Starter
Join Date: Oct 2002
Location: Kentucky
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Is it possible for me to achieve 400 rwhp with the following? I have an 99 ws6 a4.
With all bolt on could how could i get 400 rwhp
GTP stage II heads, 5.3 i think
tr 220 on 114lsa
or tr 224 on 114 lsa
or
TEA stage II heads
with similar cams..
With all bolt on could how could i get 400 rwhp
GTP stage II heads, 5.3 i think
tr 220 on 114lsa
or tr 224 on 114 lsa
or
TEA stage II heads
with similar cams..
10-18-2002, 11:15 AM
#3
Teching In
Thread Starter
Join Date: Oct 2002
Location: Kentucky
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible for me to achieve 400 rwhp with the following? The long tubes are already ordered, the programming would be done by TEA.......
Can the ls1
Can the ls1
10-18-2002, 02:23 PM
#5
Teching In
Join Date: May 2002
Location: Kentucky
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible for me to achieve 400 rwhp with the following? what about in a a4, i know it is very easy for a m6.....
Oh yeah, I'm cnalk... I was at school and couldn't get my password because my email isn't free that i use for jacs...
Oh yeah, I'm cnalk... I was at school and couldn't get my password because my email isn't free that i use for jacs...
10-19-2002, 09:30 AM
#6
Teching In
Join Date: May 2002
Location: Kentucky
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible for me to achieve 400 rwhp with the following? Does anyone have TEA head/cam with over 400 rwhp?
This is the way I'd like to go then add 75-100 shot.
This is the way I'd like to go then add 75-100 shot.
10-19-2002, 09:43 AM
#7
Re: Is it possible for me to achieve 400 rwhp with the following? To the best of my knowledge all M6 TEA Stage II heads and cam cars are over 400rwhp.
Sporadic - TEA 6.0 Stage II heads made 420rwhp with B1 cam, MAC's and [b]LS1[/b} intake.
Verbs - TEA Stage II heads made 5.3's (LT's, TR 230/224 cam & LS6 intake) made 440rwhp untuned with a 12-bolt & 3.73's
The only TEA Stage I H & C I've read about made 380-385ish rwhp with Hammer cam.
The CNCing is the same on Stage I & Stage II heads, but the Stage II uses Ferra valves for better flow. The stage I heads use stock valves.
I think the TEA results are outstanding as the heads cost ~$1800 have dual springs and lots of other good stuff.
If you get lucky and get in on a GP (maybe one forming on the board in Sponsor section) the price could in ~$1500-$1600
Core charge is very reasonable too.
I felt the $1000 or so I saved getting TEA's over GTP's would go a long way toward other mods etc maybe a 12-bolt a little later etc.
Sporadic - TEA 6.0 Stage II heads made 420rwhp with B1 cam, MAC's and [b]LS1[/b} intake.
Verbs - TEA Stage II heads made 5.3's (LT's, TR 230/224 cam & LS6 intake) made 440rwhp untuned with a 12-bolt & 3.73's
The only TEA Stage I H & C I've read about made 380-385ish rwhp with Hammer cam.
The CNCing is the same on Stage I & Stage II heads, but the Stage II uses Ferra valves for better flow. The stage I heads use stock valves.
I think the TEA results are outstanding as the heads cost ~$1800 have dual springs and lots of other good stuff.
If you get lucky and get in on a GP (maybe one forming on the board in Sponsor section) the price could in ~$1500-$1600
Core charge is very reasonable too.
I felt the $1000 or so I saved getting TEA's over GTP's would go a long way toward other mods etc maybe a 12-bolt a little later etc.
Trending Topics
10-21-2002, 04:08 PM
#8
On The Tree
iTrader: (-1)
Join Date: Nov 2001
Location: Kennesaw, GA
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible for me to achieve 400 rwhp with the following? 440rwhp untuned?? LOL, I think he might have tried to pull a fast one on you... <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" />
10-21-2002, 04:08 PM
#9
On The Tree
iTrader: (-1)
Join Date: Nov 2001
Location: Kennesaw, GA
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Re: Is it possible for me to achieve 400 rwhp with the following? 440rwhp untuned?? LOL, I think he might have tried to pull a fast one on you... <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" />
