two things
10-25-2002, 12:01 AM
#1
Banned
Thread Starter
Join Date: Sep 2002
Location: Azle/Saginaw, Tx
Posts: 5,581
Likes: 0
Received 0 Likes
on
0 Posts
two things if you have a 5.3 and put a 6.0 crank in it...what do you come up with and what other mods would have to go along with that conversion. how do you find cubic inches but borexstroke...what is the formula?
10-25-2002, 12:54 AM
#2
Staging Lane
Join Date: Nov 2001
Location: Grapevine, TX / College Station, TX
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: two things I'm pretty sure that the 5.3, 5.7, and 6.0L all use the same crank just different bore. 5.3 has a 3.779" bore, 5.7 has a 3.89", and the 6.0 has a 4.001" bore; all use the 3.622" crank. The formula for cubic inches is Cylinder area x Stroke length x 8. (pi x r(1/2 of the bore size))^2 x stroke x 8.
http://www.aera.org/Tech/cube_calc.html
That site will do it for you, just plug in the bore, stroke, and # cylinders. To get liters, divide by 61(approximate). Hope that helps.
Brandon.
http://www.aera.org/Tech/cube_calc.html
That site will do it for you, just plug in the bore, stroke, and # cylinders. To get liters, divide by 61(approximate). Hope that helps.
Brandon.