Looking for a cam that will have low end power with heads.
#1
Looking for a cam that will have low end power with heads.
Have had a new cam in for about 6 months, and it makes power, but not much down low were it is funner on the street.
I used to have the TR 224/563/114 in with Directflo Lid, Jethot headers, TCI3500 SSF, ported TB, ORP and Hooker Catback.
Now I have the same mods, but a 242/248 610/615 112 cam, stage 2 LS6 heads, ferrea 2.02/1.60 valves and crane dual valve springs.
Would going back to the 224 cam give me some nice low end back? Any cam suggestions? Keeping the ported heads on. Thanks.
I used to have the TR 224/563/114 in with Directflo Lid, Jethot headers, TCI3500 SSF, ported TB, ORP and Hooker Catback.
Now I have the same mods, but a 242/248 610/615 112 cam, stage 2 LS6 heads, ferrea 2.02/1.60 valves and crane dual valve springs.
Would going back to the 224 cam give me some nice low end back? Any cam suggestions? Keeping the ported heads on. Thanks.
#5
232/236 112LSA, TEA stage 3 heads milled to 57cc. Its all about matching the cam and heads together. This is a great street car.
Last edited by brad8266; 04-09-2007 at 06:04 PM.