rollinna65

iTrader: (18)

Hell yeah, my buddy and I ordered his from SDPC on a Sunday late at night and it arrived Wednesday afternoon.

Rob98LS1

iTrader: (5)

Does the HOTCAM have any lope to it? I know that the lsa is 112 so I'm wondering if its more noticeable sounding than a stock cam. I hate the sound of the stock cam, ugh.

vidal77boxing

iTrader: (15)

yes, it lopes really nice.

GR33N GoblinM6

iTrader: (14)

my cam is in... timing chain on, timing cover on, crank pulley on.. im doing motor mounts today before i put the heads on... then putting the heads on tonight, and start buttoning up everything... i should be done by this weekend.. im taking my time since i stripped my car down to the short block, need to make sure i hooked up everything correctly.

L$1W$6

iTrader: (26)

awesome .....cant wait to see how eveything turns out.

vidal77boxing

iTrader: (15)

Good luck on your build. I'm planning on swapping my hotcam for the ASA cam this friday. Since i dont have to replace the springs im hoping to have it 85% torn down on friday and finish everything by saturday evening. Hopefully just in time see Mayweather get KNOCKED OUT.

GR33N GoblinM6

iTrader: (14)

I need some info from you guys that have this cam installed..

Did anyone check the PTV clearance? im kind of worried about this because i have milled my heads to 63cc's.. but im using the .060 gaskets..

anyone have info or data on the PTV clearance?? anyone check it ??? I dont have clay or a gauge.. so i need some of you guys with this cam, to speak up.

jmm98LS1

iTrader: (28)

You should be fine with stock valves. Bigger valves causes more of a problem than milling a couple cc's out of the chamber.

d james

This should be real interesting, I'm hoping you will see a nice increase. You can let us know if its worth even upgrading from the hotcam to the ASA.

Are you running the stock tune on that hotcam?
Any track times so you can compare them to the ASA?

vidal77boxing

iTrader: (15)

no track times on the hotcam. the car is tuned and put down 378 with long tubes, ls6 intake, 243 heads through an M6. Im trying to get to 400rwhp. We'll see what happens.

L$1W$6

iTrader: (26)

Any dyno #'s yet? How is everything going?

GR33N GoblinM6

iTrader: (14)

no not done yet... and wont be done until this weekend... motor mounts were a bitch to change.. and took up a very large portion of the day... today the heads, intake, and accessories will be going back on... then adding fluids and such tomorrow.. im trying to get the tuning work out with the tuner, need him to come to my house then head down to the dyno shop... trying to work out a day he can do this.

L$1W$6

iTrader: (26)

kool ...keep us posted!

GR33N GoblinM6

iTrader: (14)

New update... taking advice from members here and my tuner's advice.. i went ahead and orderd Coated pacesetters and pacesetter Y pipe from SpeedInc. today.

so we will have to wait to get those in before we hear the car... and yes i promise to update this thread with pics and video of the car running..

incase anyone wants to know... SpeedInc has a great deal on coated pacesetters right now.. and FREE shipping.. i got the coated headers and the Y pipe for $499.98 SHIPPED... cant beat that deal.. believe me i searched for a solid 2 days.. best deal around...

maars5h

Anybody tried tuning an ASA cam with a handheld tuner. Just put the cam in. It won't idle at all. Plan on getting it tuned,but was wanting to see if I could get it to somewhat idle. Also read that some of you had to do a SD tune. What is a SD tune? Thnx

GR33N GoblinM6

iTrader: (14)

SD = Speed Density.. meaning you remove the MAF ... MAF = Mass Air Flow sensor.

and now its not manditory..

d james

IS it because the idle is to low?-you could turn that idle screw up a little bit to open up the plate to let more air in.
IS your car an automatic or standard trans?

I was thinking about this cam, but don't want to get it tuned for a few weeks after the install, but it sounds manditory right off the bat if it won't idle.

vidal77boxing

iTrader: (15)

i finished my ASA cam install on sat and just finished getting the car tuned. I made more power and torque with the hotcam. im so pissed! I guess its time for another swap. anyone have a tr 224 on 112?

GR33N GoblinM6

iTrader: (14)

I think you need a new tuner then... the hot cam is smaller .. that doesnt add up..

vidal77boxing

iTrader: (15)

i go to a HPT. The owner is a reputable tuner. How much power did u put down?