Absolute Speed Stage 2 Heads Dyno #'s
#1
On The Tree
Thread Starter
Join Date: Jun 2002
Location: DALLAS
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Absolute Speed Stage 2 Heads Dyno #'s
I just had my car tuned and dyno'd at AMS by Chris. Here's the #'s, without an LS6 intake or ASP pulley:
391 RWHP
385 RWTQ
Then Chris richened it up a little for the street, and my drive off #'s were:
387.6 RWHP
378.8 RWTQ
391 RWHP
385 RWTQ
Then Chris richened it up a little for the street, and my drive off #'s were:
387.6 RWHP
378.8 RWTQ
#7
On The Tree
Thread Starter
Join Date: Jun 2002
Location: DALLAS
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Re: Absolute Speed Stage 2 Heads Dyno #'s
Dan, I don't have any before #'s. That's the first time for the car to be on the dyno. My best 1/4 mile time was 12.9 @ 109, before any mods were done.
Bill, I was told that that DynoJet dyno's low compared to other dyno's in the area by about 20 or so HP. But that just means that the other dyno's in the area could be dynoing a little high. I'm happy with the #'s, considering that I don't have an LS6 intake, ASP pulley, cutout, and didn't do any dyno tricks for those #'s.
BTW here's what my heads flowed w/2.02/1.57 valves and 209cc intake runners. Keep in mind that the exhaust is flowed without a tube.
200 159 107
300 212 146
400 267 193
450 284 203
500 296 217
550 301 220
600 307 223
Bill, I was told that that DynoJet dyno's low compared to other dyno's in the area by about 20 or so HP. But that just means that the other dyno's in the area could be dynoing a little high. I'm happy with the #'s, considering that I don't have an LS6 intake, ASP pulley, cutout, and didn't do any dyno tricks for those #'s.
BTW here's what my heads flowed w/2.02/1.57 valves and 209cc intake runners. Keep in mind that the exhaust is flowed without a tube.
200 159 107
300 212 146
400 267 193
450 284 203
500 296 217
550 301 220
600 307 223
Trending Topics
#8
Restricted User
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Absolute Speed Stage 2 Heads Dyno #'s
I hope the flow sheet looks like that with the heads I ordered from Absolute Speed... Were they the 5.7 Heads? How much were they milled?
#9
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: Absolute Speed Stage 2 Heads Dyno #'s
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 2001 Pewter WS6:
<strong>I hope the flow sheet looks like that with the heads I ordered from Absolute Speed... Were they the 5.7 Heads? How much were they milled?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Ditto on that <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> , Mine should be here by the end of the month, the GP helped and the fact I had 6.0L heads for cores got me down to $1330 for LS1 S2's with dual valve springs <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> .
Those numbers are not bad, but I'm hopeing the dyno was reading low for you, but, an LS6 intake, pulley, and cutout would be worth an easy 20 RWHP <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Dan
<strong>I hope the flow sheet looks like that with the heads I ordered from Absolute Speed... Were they the 5.7 Heads? How much were they milled?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Ditto on that <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> , Mine should be here by the end of the month, the GP helped and the fact I had 6.0L heads for cores got me down to $1330 for LS1 S2's with dual valve springs <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> .
Those numbers are not bad, but I'm hopeing the dyno was reading low for you, but, an LS6 intake, pulley, and cutout would be worth an easy 20 RWHP <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Dan
#10
On The Tree
Thread Starter
Join Date: Jun 2002
Location: DALLAS
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Re: Absolute Speed Stage 2 Heads Dyno #'s
Hey 2001 Pewter WS6, they are the 5.7L '98 heads, and the comp ratio is 10.9:1. So whatever needs to be milled off to go from 10.1:1 to 10.9:1.
Dan, I was kinda hoping for some 400 RWHP #'s, I won't lie to you. But I don't think I got one of the faster ones from the factory. But I'm deffinantly not disappointed in the #'s. It's a good place to be, and to work from. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
Let us know how the heads do for both of you.
Dan, I was kinda hoping for some 400 RWHP #'s, I won't lie to you. But I don't think I got one of the faster ones from the factory. But I'm deffinantly not disappointed in the #'s. It's a good place to be, and to work from. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Razz]" src="gr_tounge.gif" />
Let us know how the heads do for both of you.
#13
On The Tree
Thread Starter
Join Date: Jun 2002
Location: DALLAS
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Re: Absolute Speed Stage 2 Heads Dyno #'s
Hey mrb, yes I do have the TR-55 in, and they're gapped at .050.
As for the LS6 intake, maybe my wife will get it for me for Christmas <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Hey we can hope right??
As for the LS6 intake, maybe my wife will get it for me for Christmas <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Hey we can hope right??